The higher output American DJ Monster Fun is a 2-FX-IN-1 DMX LED Moonflower and strobe lighting effect with 5 lenses and 4 strobe strips. This package includes a wireless remote control.

This light features 25 1-watt red, blue, green, white, and amber colored LEDs. This effect offers small clubs, bands, roller rinks, and mobile entertainers the convenience of having multiple effects in one light show without having to transport multiple fixtures. The 12 built-in lights show create pure lighting excitement at any event.

The Fun Factor LED is easy to use and has 3 operational modes: DMX controller, master/ slave, and sound active. There are several built-in programs when used in sound active or master/ slave modes. Users can also use the easy-to-use UC-IR infrared remote control (sold separately) from ADJ to turn the unit on/ off and scroll through different programs. There is a safety loop on the rear panel as well to be used with safety cable.

• Monster Fun Light Effect
• 2-FX-IN-1 DMX LED moonflower and strobe lighting effect with 5 lenses and 4 strobe strips
• 25 1-watt RGBWA LEDs (5 red, 5 green, 5 blue, 5 white, and 5 amber lights)
• 72 white strobe LEDs
• Large beam angle: 60 degrees
• Stand alone or master/ slave configuration set up
• 3 operating modes: Sound active/ show mode/ DMX control
• 1 DMX channel
• 12 built-in light shows
• ADJ UC-IR remote compatible (not included)
• 4-button DMX LCD display on rear panel
• Linkable via 3-pin XLR cable
• IEC power cord daisy chain (7 fixtures maximum @ 120V and 12 fixtures maximum @ 230V)
• Includes single yoke to mount on wall or from trussing bracket
• Safety loop on rear panel
• Multi voltage: AC 100V-240V 50/ 60Hz (auto sensing)
• Power consumption: 50 watts
• Dimensions: 13.5 x 9.5 x 13.5 inches
• Weight: 10 pounds
• Part number: MONSTER-FUN
• Wireless Remote
• Wireless remote control
• Dimmer buttons to adjust the output intensity
• Full-on button fully lights up the unit
• Blackout function
• Control fade or Gobo (depending on the fixture)
• Color mode with 5 buttons to select your desired color
• Use show buttons to display different shows
• Programs
• Use buttons 1-9 to select your desired color when color mode is active or your desired show when show mode is active
• Strobe light function
• Activate and deactivate sound active mode
• Compatible with ADJ's following products: Inno Pocket Spot, Inno Pocket Spot Pearl, Inno Pocket Roll, Inno Pocket Scan, Monster Duo, Monster Quad, Monster Fun, Rotobeam 4, Quad Phase HP, LED UV Go, Pinspot LED Quad, Pinspot LED Quad DMX, Inno Pocket Beam Q4, Inno Pocket Wash, Inno Pocket Spot Twins, Super Spot LED, and Zipper
• Part number: UC-IR

Shipping Information

VMInnovations is proud to offer fast, free shipping every day. Items are typically delivered between 1-3 days.

Most orders placed before 2:00 PM CST ship the same day.

Free Shipping Details

• Our free shipping service is standard ground shipping with FedEx, USPS, or a regional carrier.
• Items are usually delivered in 1-3 days, but some may take up to 5 days.
• Some orders may require a signature before delivery.
• At this time, we only offer free shipping inside the 48 continental United States.
• Free shipping is not available for APO/FPO.
• Some items can be shipped to Alaska, Hawaii, or Puerto Rico. Please note free shipping does not apply to these locations. You will need to select the AK/HI/PR shipping in your cart.
• We are currently unable to ship items internationally.

Freight Shipping Information (LTL)

Some items are too large to be shipped with a regional carrier, FedEx, or USPS, and we ship these items with our freight carriers.

Please read the information below so you fully understand the delivery process and requirements.

Required Actions

We will need your phone number for the delivery. The carrier will need to call you in order to set up a delivery time. Please make sure the number you provide during checkout is the best one to reach you. If paying with PayPal, please make sure the number on your account is accurate.

You'll need to inspect your package upon arrival before you sign. If your order arrives damaged, you should sign "DAMAGED" on the delivery receipt. If the item is damaged to the point that it is not usable, you can refuse the item.

Please notify and, if possible, send photos of any damage to vminnovations_help@email.spreetail.com, along with your order number. A member of our Customer Experience team will reach out to you with further instructions.

Delivery Information

At this time, we do not offer "in-home" deliveries. Your shipment must be delivered to the curbside and will require a signature. Please be sure you are able to move the item after it arrives, as the carrier will not be able to assist.

We do our best to ship orders as fast as we can. If you need to cancel your order, please let us know as soon as possible by calling our Customer Experience team at 866-639-9320. Please note that if we are unable to cancel your order before it ships, you will be responsible for the shipping charges.

If the item is returned from the freight company for any reason other than damage, additional shipping or storage fees may apply. Reasons may include invalid or incorrect address information, and incorrect phone number or contact information, or failing to schedule or missing an already scheduled delivery appointment.

If the item is delivered and a return is requested, the freight shipping fees will be deducted from the final refund amount.