Keep the music going hard from the club to the afterparty with the SoundStream Rubicon Nano 2000 W Class D 5 Channel Car Audio Amplifier.

This car audio amplifier is an ideal addition or replacement for your existing car audio setup, delivering those deep, low notes with <0.05 percent total harmonic distortion. A hybrid aluminum alloy heatsink construction provides optimal heat dissipation so you do not need to worry about your equipment overheating. The Rubicon Nano features an increased power supply, output stage components, and monoblock bridging capability providing you an exciting and versatile audio system.

Easily install your car audio amplifier thanks to the signal inputs, power/ground inputs, and speaker connections located on the edge of the chassis for easy access. Conveniently make adjustments with pre-amp and crossover options fixed on the top surface of the amplifier. An included remote gain control knob allows you to tune your amps input stage to accept the proper voltage level to ensure better sound and to maintain your equipment. Measuring 12 inches long, 8.25 inches wide, and 2.75 inches high you can ensure you have room to install this exciting car audio sound amplifier.

Upgrade the stereo system in your car or truck from factory to fantastic with the SoundStream Rubicon Nano Car Audio Amplifier.

• Class D car audio amplifier features a hybrid aluminum alloy heatsink construction for optimal heat dissipation
• 5-channel amplifier powered by maximum power of 2000 watts providing powerful sound
• RMS power of 75W x4 plus 300W x1 at 4 ohms, 100W x4 plus 500W x1 at 2 ohms, and 200W x2 plus 500W x1 at 4 ohms bridged
• Included remote gain control knob allows you to tune your amps input stage to accept the proper voltage level
• Features an increased power supply, output stage components, and monoblock bridging capability
• Signal inputs, power/ground inputs, and speaker connections located on edge of chassis for easy install
• Pre-amp and crossover options fixed on the top surface to assist with easy adjustments and installation
• Low pass filter: 50Hz to 500Hz / (x10) 500Hz to 5KHz
• High Pass Filter: 50Hz to 500Hz / (x10) 500Hz to 5KHz
• Bass boost: 0 to 18dB (channel 5)
• Bass boost frequency: 45Hz (channel 5)
• Subsonic filter: 20Hz to 50Hz (channel 5)
• Frequency response: 10Hz to 50KHz (channel 1 through 4) / 10Hz to150Hz (channel 5)
• Signal-to-noise: 104dB
• Input sensitivity: 200Mv to 6V
• Total harmonic distortion: <0.05 percent
• Operation voltage: 9V to 16V DC
• Fuse rating: 30 amps x 3
• Dimensions (L x W x H): 12 x 8.25 x 2.75 inches
• Weight: 8.3 pounds
• Manufacturer's warranty: 1-year warranty

Shipping Information

VMInnovations is proud to offer fast, free shipping every day. Items are typically delivered between 1-3 days.

Most orders placed before 2:00 PM CST ship the same day.

Free Shipping Details

• Our free shipping service is standard ground shipping with FedEx, USPS, or a regional carrier.
• Items are usually delivered in 1-3 days, but some may take up to 5 days.
• Some orders may require a signature before delivery.
• At this time, we only offer free shipping inside the 48 continental United States.
• Free shipping is not available for APO/FPO.
• Some items can be shipped to Alaska, Hawaii, or Puerto Rico. Please note free shipping does not apply to these locations. You will need to select the AK/HI/PR shipping in your cart.
• We are currently unable to ship items internationally.

Freight Shipping Information (LTL)

Some items are too large to be shipped with a regional carrier, FedEx, or USPS, and we ship these items with our freight carriers.

Please read the information below so you fully understand the delivery process and requirements.

Required Actions

We will need your phone number for the delivery. The carrier will need to call you in order to set up a delivery time. Please make sure the number you provide during checkout is the best one to reach you. If paying with PayPal, please make sure the number on your account is accurate.

You'll need to inspect your package upon arrival before you sign. If your order arrives damaged, you should sign "DAMAGED" on the delivery receipt. If the item is damaged to the point that it is not usable, you can refuse the item.

Please notify and, if possible, send photos of any damage to vminnovations_help@email.spreetail.com, along with your order number. A member of our Customer Experience team will reach out to you with further instructions.

Delivery Information

At this time, we do not offer "in-home" deliveries. Your shipment must be delivered to the curbside and will require a signature. Please be sure you are able to move the item after it arrives, as the carrier will not be able to assist.

We do our best to ship orders as fast as we can. If you need to cancel your order, please let us know as soon as possible by calling our Customer Experience team at 866-639-9320. Please note that if we are unable to cancel your order before it ships, you will be responsible for the shipping charges.

If the item is returned from the freight company for any reason other than damage, additional shipping or storage fees may apply. Reasons may include invalid or incorrect address information, and incorrect phone number or contact information, or failing to schedule or missing an already scheduled delivery appointment.

If the item is delivered and a return is requested, the freight shipping fees will be deducted from the final refund amount.