









2) Lanzar MAXP84 8" 1600W Car Subwoofers + 1600W 2-Channel Amplifier + Amp Kit
Description
**Package Includes:**
2 x Lanzar MAXP84 8" 800W Car Subwoofers
1 x VM Audio EXA1600.2 1600W 2 Channel Car Amplifier
1 x VM Audio SRPK4R 4 Gauge Complete Amplifier Installation Kit
Take your sound to the MAX with the **Lanzar MAXP84** MAX series subwoofers. This 8' sub is specially designed to push up to 800 watts of bone shattering bass, thanks to the 1.5' high temperature aluminum voice coil and 50 oz. magnet. It all sits on a non press paper cone with specially treated foam edge suspension for a clean, distortion free low end. The rubber magnet boot cover keeps your equipment safe and extends the life of the product. 4 ohm impedance.
This VM Audio Amplifier offers an RMS power rating of 400 watts x 2 channels at 4 Ohm and a peak power of 800 watts x 2 channels at 2 Ohm. Its extremely low noise and distortion means this amplifier runs quietly and efficiently, and it offers a dedicated soft turn on circuit.
The Fidelity Class A/B Circuitry delivers precise half signal transitions with low heat generation. Signals are reproduced separately and joined together to complete the full signal. Measuring 12.17"L x 9.65" W x 2.17" H, this amplifier can fit in slim spaces.
The complete **amplifier wiring kit** comes with all the cables, connectors and accessories you'll need to wire your amp easily. This amplifier wiring kit comes with 4 gauge, high current power cables with 315 multi stranded copper, EMI isolated RCA audio cables with maximum surface contact connect with an exclusive VM Audio barrel grip, a nickel plated high impact resistant 60 AGU fuse holder with exclusive 4 gauge maximum wire to surface current flow directivity and much more.
This **amplifier wiring kit** also comes with all the installation hardware you'll need to have your amp up and running in less time.
**We are an authorized Lanzar & VM Audio dealer**
- **Subwoofers:**
- NEW PAIR LANZAR 8'' 1600 Watt High Power Subwoofers
- 800N WATT (1600 WATT PAIR)
- Non Press paper Cone
- Specially Treated Foam Edge Suspension
- 1.5'' High Temperature Aluminum Voice Coil
- Magnet Weight: 50 Oz
- Impedance: 4 Ohm
- Single Voice Coil
- Fs: 60, Qms: 4.08, Qes
- 1.2, Qts: 1.1, SPL: 88(dB), Vas: 6.0(Cuft)
- Mounting Depth: 4.08"
- Rubber magnet Boot Cover
- 1 Year Manufacturer Warranty
- **Amplifier:**
- Type: Mosfet
- Channels: 2
- Total Power 1600W
- RMS Power @ 4 Ohm: 400Wx2
- Peak Power @ 2 Ohm: 800Wx2
- Peak Power @ 4 Ohm Bridged: 1600Wx1
- Minimum Impedance Unbridged: 2
- Minimum Impedance Bridged: 4
- Frequency Response: 20Hz 20kHz
- Single to Noise Ratio: 93dB
- Circuit Type: A/B
- Protection Circuit: 5 Way
- Low/Highpass Crossover: 50Hz 250Hz
- Preamp Outputs: 1 Pair
- Bass Boost: 0dB 12db
- Bass/Gain Remote: NA
- Power Indicator: Yes
- Terminals: Nickel Plated
- Power /Ground Connection: 4 Gauge
- Input Voltage: 14.4V
- Fuse: 40A
- Dimensions: 12.17"L x 9.65" W x 2.17" H
- Warranty: 1 Year
- **Amp Kit:**
- New VM Audio SRPK4R **4 Gauge Amplifier Complete Wiring Kit**
- Maximum of 2000 watts
- Complete amplifier wiring kit with cables, connectors and accessories
- 4 Gauge high current power cables with 315 multi stranded bare copper
- 4 Gauge high current ground cables with 315 multi stranded bare copper
- 18 Gauge remote turn on wire with solid red insulation jacket
- 12 Gauge high density two conductor copper speaker wire with clear red insulation jacket
- E.M.I isolated RCA audio cables with maximum surface contact connection and exclusive VM audio barrel grip
- Nickel plated, high impact resistant 60 AGU fuse holder with exclusive 4 Gauge maximum wire to surface current flow directivity
- 4 Gauge nickel plated power/ground solder less ring crimp terminals
- 4 Gauge nickel plated power/ground solder less spade crimp terminals
- Quick connect nickel plated crimp speaker wire connector
- Element protection power cable loom jacket
- High quality insulated solder less crimp butt terminals
- Durable high strength nylon tie wraps
- Kit includes:
- 16 Ft red 4 gauge power wire
- 3 ft black 4 gauge ground wire
- 15 ft high performance RCA wire
- 4 Gauge In line AGU fuse holder
- 60 Amp AGU fuse
- 15 ft 18 Gauge Remote wire
- 20 ft 12 gauge Speaker wire
- 20) 6" wire ties
- 2) spade connectors
- 2) ring connectors
- 3) screws
- 3) butt connectors
- 4) fasten connectors
- 5) spade connectors
- Cable firewall black rubber grommets
- Product Condition: Brand New
- Part Number: SRPK4R
- 1 Year Manufacturer Warranty
Shipping & Returns
Shipping Information
VMInnovations is proud to offer fast, free shipping every day. Items are typically delivered between 1-3 days.
Most orders placed before 2:00 PM CST ship the same day.
Related Products
If you have any questions, you are always welcome to contact us. We'll get back to you as soon as possible, within 24 hours on weekdays.
-
Shipping Information
Use this text to answer questions in as much detail as possible for your customers.
-
Customer Support
Use this text to answer questions in as much detail as possible for your customers.
-
FAQ’s
Use this text to answer questions in as much detail as possible for your customers.
-
Contact Us
Use this text to answer questions in as much detail as possible for your customers.

