










2) Pyle PL1290BL 12" 2400W Car Subwoofers + 2000W Bluetooth 2-Ch Amp + Amp Kit
Description
**Package Includes:**
2 x Pyle PL1290BL 12" 1200W Car Subwoofer
1 x Lanzar HTG258BT 2000W 2 Channel Bluetooth Car Amplifier
1 x VM Audio SRPK4R 4 Gauge Complete Amplifier Installation Kit
The **Pyle PL1290BL** is a 12' booming 1200 watt (2400W per pair) subwoofer designed with the bass lover in mind. This subwoofer will make your music growl in your vehicle or at home, in any type of enclosure: sealed, vented, or open air. The blue injected molded cone looks great and thanks to a 90 oz. magnet, non fatiguing big rubber suspension, and a rubber magnet boot, it sounds great too. The flat progressive spider design improves the speaker's mechanical stability increasing the life of your speaker and keeping your sound clearer over time. Connect using the silver plated terminals for a distortion free sound.
The **Lanzar HTG258BT** 2 channel amplifier features a MAX power handling of 1 channel 2000 watts at 4 ohms bridged and a RMS power handling of 2 channel 500 watts at 4 ohms. Other features include Built in Bluetooth for Wireless Music Streaming (Works with All Your Favorite Devices). Instantly stream your favorite tracks from your smartphone or tablet; you can also stream your favorite internet radio providers.
Not only is the Shaker Series Amplifier Installation Kit a true lifesaver, but it also is designed to make your entire sound system work at peak performance. If you want your amplifier to operate at its best you simply cannot use inferior parts and accessories. Our exclusive, pre selected set of tools includes CopperCure highly conductive copper wires that are oxygen free to ensure clean and consistent power transfer.
These high performance copper wires are wrapped in the durable and flexible SurfaceFlex wire jacket for effective cable routing. The CRB fuse holder has been specially plated with nickel for corrosion protection against the elements. Last but not least, distortion and external noise are reduced to a minimum with the Strand Interaction Conductor.
**We are an authorized Pyle & Lanzar dealer**
- **Subwoofers:**
- New Pyle 12" 2400 Watt DVC Subwoofers (Pair)
- 2400 Watt Total Power Handling (1200 WATT Each Sub)
- Blue Injection Molded Cone
- Specially Treated Rubber Edge Suspension
- Chrome Steel Basket
- Bumped & Vented Pole Piece
- Silver Plated Terminal
- Flat Progressive Spider
- New Wave Like Rubber Gasket
- Rubber Magnet Boot
- 2.5'' High Temperature Dual Kapton Voice Coil
- Magnet Weight: 2x90 oz
- Impedance: 4 Ohm
- SPL: 85dB
- Overall Diameter: 12.20''
- Mounting Depth: 6.52''
- 1 Year Manufacturer Warranty
- **Amplifier:**
- Lanzar HTG258BT 2000 Watt 2 Channel Car Audio Amplifier Amp Wireless Bluetooth
- RMS Power:
- 2 X 500W RMS @ 4 Ohms
- 2 X 650W RMS @ 2 Ohms
- MAX Power:
- 1 X 2,000W MAX @ 4 Ohms Bridged
- 2 X 1,000W MAX @ 4 Ohms
- Wireless Bluetooth Audio Interface
- Bass Boost Circuitry
- Bridgeable at 4 Ohms Mono
- 2 Ohm Stereo Stable
- Chrome RCA inputs
- Stereo Line Outputs for Left and Right Channel
- Low Pass Filter Controls
- LPF Freq Response: 50Hz 250Hz
- High Pass Filter Controls
- HPF Freq Response: 80Hz
- Power and Protection LED Indicators
- Soft Turn on/Turn off
- THD: <0.01%
- S/N Ratio: >90dB
- Channel Separation: >65dB
- Freq. Response: 10Hz 45KHz
- Fuse: 40A X 1
- Dimensions: 12.99''(L) X 2.24''(H) X 8.81''(W)
- Sold as : 1
- Condition: Brand New!
- Item Weight: 6.55 lbs.
- Part Number: **HTG258BT**
- 1 Year Manufacturer Warranty
- **Amp Kit:**
- Complete 2 Channel Amplifier Wiring Kit with Cables, Connectors and Accessories
- 4 Gauge High Current Power and Ground Cables with 315 Multi Stranded Bare Copper
- Wire Construction In a Translucent Red/Black Insulation Jacket
- 18 Gauge Remote Turn On Wire with Solid Red Insulation Jacket
- 12 Gauge High Density Two Conductor Copper Speaker Wire with Clear Red Insulation Jacket
- E.M.I. Isolating RCA Audio Cables with Maximum Surface Contact
- Connection and Exclusive VM Audio Barrel Grip Nickel Plated, High Impact Resistant 60A AGU Fuse Holder with Exclusive 4 Gauge
- Maximum Wire To Surface Current Flow Directivity
- 4 Gauge Nickel Plated Power/Ground Solderless Ring Crimp Terminals
- 4 Gauge Nickel Plated Power/Ground Solderless Spade Crimp Terminals
- Element Protection Power Cable Loom Jacket
- Quick Connect Nickel Plated Crimp Speaker Wire Connectors
- High Quality Insulated Solderless Crimp Butt Terminals
- Durable High Strength Nylon Tie Wraps
- Cable Firewall Black Rubber Grommets
Shipping & Returns
Shipping Information
VMInnovations is proud to offer fast, free shipping every day. Items are typically delivered between 1-3 days.
Most orders placed before 2:00 PM CST ship the same day.
Related Products
If you have any questions, you are always welcome to contact us. We'll get back to you as soon as possible, within 24 hours on weekdays.
-
Shipping Information
Use this text to answer questions in as much detail as possible for your customers.
-
Customer Support
Use this text to answer questions in as much detail as possible for your customers.
-
FAQ’s
Use this text to answer questions in as much detail as possible for your customers.
-
Contact Us
Use this text to answer questions in as much detail as possible for your customers.

