











AudioPipe MOSFET Car Stereo Amplifier w/ 4 Driver Speakers & Complete Wiring Kit
Description
Get awesome sound in your car audio with the AudioPipe MOSFET Car Stereo Amplifier with 4 Driver Speakers and Wiring Kit.
This car sound system amplifier controls your sound with the 2-channel operation, built-in variable high/low pass crossover, and remote volume control for subwoofers. Connect several speakers with the RCA line input/output jacks. The sound stays crisp and clear thanks to reduced distortion from adjustable input level controls with ground loop isolation and pulse-width modulated MOSFET power supply.
At 6.5 inches in size and an innovative flat house design, this small-but-mighty driver speaker will bring the bass without requiring a large mounting depth. It possesses an 18-ounce magnet, durable 1.5-inch TIL voice coil, and it's all protected by a classic dust cap.
The 8 Gauge amplifier installation kit has everything you need to install your amplifier in your car. The amp kit features a red power cable, fuse holder, black ground cable, blue turn-on wire, an RCA interconnect, speaker wire, 20, 4-inch wire ties, rubber grommets, a Number 10 ring terminal, a 5/16-inch ring terminal, and a ring terminal.
Get more performance with your car audio with the AudioPipe MOSFET Car Stereo Amplifier with 4 Driver Speakers and Wiring Kit.
- This bundle comes with a car stereo amplifier, 4 driver speakers, and a complete wiring kit
- Get the power to your subwoofers and speakers and rock amazing sound with this 2,000-watt, 4-channel car audio power amplifier
- Control your sound with the 4-channel operation, built-in variable high/low pass crossover, and remote volume control for subwoofers
- Set of 4 drivers are designed to provide pro audio quality sound in the comfort of your vehicle with 250 watts MAX power, 125 watts of RMS power, and 8-ohm impedance
- 8 gauge amplifier installation kit with everything you need to install your amplifier in your car
- AudioPipe APCLE-2004 (1 Pack)
- Get power to your subwoofers and speakers and rock amazing sound with this 2,000-watt, 4-channel car audio power amplifier
- Control your sound with 4-channel operation, built-in variable high/low pass crossover, and remote volume control for subwoofers
- 2 Ohm stereo stable and 4 Ohm monostable
- Minimizes distortion with adjustable input level controls with ground loop isolation and pulse-width modulated MOSFET power supply
- Electronic protection circuity protects the car amp from short circuit, DC offset, and thermal overload
- Features RCA line input/output jacks and platinum-plated power, speaker, and RCA connectors
- Low profile construction built to last with moisture-resistant circuit boards and aluminum heat sink for efficient heat dissipation
- Remote turn-on with "soft start" muting to prevent that turn-on "thump"
- RMS power rating: 4 ohms: 100 watts x 4 channels, 2 ohms: 150 watts x 4 channels, and 4 ohms: 300 watts x 2 channel (Bridged)
- Frequency response: 20Hz to 20KHz
- Input sensitivity: 0.2-volt to 6-volt
- Crossover range: 55Hz to 5.5KHz
- THD: < 0.05-percent
- Signal-to-noise ratio: Greater than 95 dB
- Dimensions (L x W x H) 15.1 x 6.9 x 2.2 inches
- Weight: 9.6 pounds
- Warranty: 1 Year Manufacturer Warranty
- Part Number: APCLE-2004
- Quantity: 1
- AudioPipe APMB-65FLT (4 Pack)
- Designed to provide pro audio quality sound in the comfort of your vehicle with 250 watts MAX power, 125 watts of RMS power, and 8-ohm impedance
- 6.5-inch midrange driver speaker designed to bring you the sound you've been searching for
- Flat house design allows for minimum mounting depth
- 18-ounce magnet with 1.5-inch TIL voice coil work together to give you bumping sound
- Classic dust cap design helps protect the internal components of the speaker
- Black powder-coated aluminum basket, high-quality paper cone, and corrugated surround provide durability and enhanced sound
- Top-mount depth: 1.94inches
- Mounting Diameter: 5.88 inches
- Frequency Response: 80 to 9,000 Hz
- Sensitivity: 94 dB
- Color: Black
- 1-year Manufacturer's Warranty
- Part Number: APMB-65FLT
- Quantity: 4
- SOUNDSTORM AKS8 (1 Pack)
- 8 gauge amplifier installation kit with everything you need to install your amplifier in your car
- Includes 20-foot 8-gauge red power cable, 3-foot 8-gauge black ground cable, and 30-foot speaker wire; 20, 4-inch wire ties
- 0.25-inch gold plated ring terminal; Number 10 gold plated ring terminal; 0.3125-inch gold plated ring terminal
- Competition high quality fuse holder; 16-foot 18-gauge blue turn on wire; 20-foot high performance RCA interconnect; 3-rubber grommets
- 17-foot 8-gauge red power cable
- Competition high quality fuse holder
- 0.25-inch gold plated ring terminal
- 3-foot 8-gauge black ground cable
- Number 10 gold plated ring terminal
- 16-foot 18-gauge blue turn on wire
- 20-foot high performance RCA interconnect
- 3 rubber grommets
- 20-foot speaker wire
- 0.3125-inch gold plated ring terminal
- 20, 4-inch wire ties
- Manufacturer warranty: 1-year warranty
- Part Number: AKS8
- Quantity: 1
Shipping & Returns
Shipping Information
VMInnovations is proud to offer fast, free shipping every day. Items are typically delivered between 1-3 days.
Most orders placed before 2:00 PM CST ship the same day.
Related Products
If you have any questions, you are always welcome to contact us. We'll get back to you as soon as possible, within 24 hours on weekdays.
-
Shipping Information
Use this text to answer questions in as much detail as possible for your customers.
-
Customer Support
Use this text to answer questions in as much detail as possible for your customers.
-
FAQ’s
Use this text to answer questions in as much detail as possible for your customers.
-
Contact Us
Use this text to answer questions in as much detail as possible for your customers.

