Boss 1100W Class A/B Amplifier & Rockford 10" 400W Car Subwoofer with Enclosure

Don't settle for a subpar car audio experience. Instead, upgrade your vehicle's audio capabilities with the Boss Audio Systems Riot 1100-Watt Monoblock MOSFET Class A/B Amplifier & Remote.

As a Class A/B amplifier with a MOSFET power supply, it gives you crystal clear and crisp acoustics as you drive down the open road. It's 2-Ohm stable to produce more power and more volume and is full of features that will leave you speechless.

This car audio amp shows off switchable bass boost, variable gain control, a variable low-pass filter, high and low-level inputs, thermal protection, and a subwoofer level control that gives you the ability to boost the sub level when an amp or subwoofer are connected. This amp and wiring kit has a peak power of 1100 watts at 2 Ohms, RMS power of 825 at 2 Ohms, peak power of 550 watts at 4 Ohms, and RMS power of 413 watts at 4 Ohms. This amplifier also comes with an 8-gauge wiring installation kit for your convenience.

This is a quality made Rockford Fosgate 10" shallow loaded subwoofer enclosure system that will product a nice deep bass. The subwoofer rated at 200 Watt RMS and wired to 2 ohm load. The subwoofer features a mica injected polypropylene cone, foam surround, stampcast basket with integrated spider venting, 2" voice coil, 12 AWG compression terminals and enclsoure is made from a durable 5/8" MDF and covered in black carpet. The dimensions of the enclosure are 113.5" x 19.0" x 5.25" (bottom) x 3.25" (top) 34.29cm x 48.26cm x 13.34cm (bottom) x 8.25cm (top).

Constructed with 5/8" MDF

Covered with high density carpet

High current binding posts

**We are an authorized Rockford Fosgate dealer**

• Boss Audio Systems Riot 1100-Watt Monoblock MOSFET Class A/B Amplifier & Remote
• Riot 1100W Monoblock Class A/B Amplifier with subwoofer control remote and an 8-gauge amplifier wiring installation kit
• MOSFET superior power supply requires less current to operate
• 2-Ohm stable to produce more power resulting in more volume
• Switchable bass boost allows you to boost the low bass +18 dB
• Variable gain control lets you balance the amps output with the speakers or sub the amp is driving
• Variable low-pass filter lets you control the frequencies that pass through the subwoofer
• High and low-level inputs provide flexibility with high-level inputs from the speakers and low-level RCA inputs accept the signal from pre-amp
• Thermal protection circuit turns the amp off and allows it to cool down before turning it back on
• Subwoofer level control gives you the ability to boost or attenuate the sub level when an amp and subwoofer are connected to the pre-amp output
• Back-lit blue illuminated logo
• Specifications:
• Total power output: 1100 watts
• Peak power: 1100 watts x 1 @ 2 Ohms
• RMS power: 825 watts x 1 @ 2 Ohms
• Peak power: 550 watts x 1 @ 4 Ohms
• RMS power: 413 watts x 1 @ 4 Ohms
• Signal to noise ratio: 102 dB
• Frequency response: 9 Hz to 50 kHz ±1 dB
• Impedance: 2 to 8 Ohms
• T.H.D: 0.01 percent
• RCA inputs: 2-channel
• Low-pass filter: 35 Hz to 160 Hz
• Bass boost: Switchable to 0 or 18 dB
• Dimensions: 9.13 x 10.44 x 2.25 inches
• Wiring kit
• 20-foot 8-gauge red power cable
• Competition, high-quality fuse holder
• 3-foot 8-gauge black ground cable
• 16-foot 18-gauge blue turn-on wire
• 20-foot high-performance RCA interconnect
• 30-foot speaker wire
• 6-foot split loom tubing
• 20, 4-inch wire ties
• 3 rubber grommets
• Number 10 ring terminal
• 5/16-inch ring terminal
• 1/4-inch ring terminal
• Weight: 2 pounds
• Rockford Fosgate R2S-1X10 10-Inch 400W Shallow Subwoofer Enclosure
• New Rockford Fosgate R2S 1X10 10" 400 Watts Shallow Car Subwoofer Sub Enclosure
• Power Handling: 200 Watts RMS
• MAX Power: 400 Watts
• Constructed with 5/8" MDF
• Covered with high density carpet
• High current binding posts
• Nominal Impedance (ea): 2 Ohm Internally wired to create a 2 Ohm amplifier load
• System Configuration: Sealed
• Enclosure Material: 5/8" MDF
• Speaker Connector: Up to 12 AWG Compression Terminals
• CEA 2031 Compliant
• Shipping Weight: 19.9 Lbs (9.02 Kg)
• Dimensions: 13.5" x 19.0" x 5.25" (bottom) x 3.25" (top) 34.29cm x 48.26cm x 13.34cm (bottom) x 8.25cm (top)

Shipping Information

VMInnovations is proud to offer fast, free shipping every day. Items are typically delivered between 1-3 days.

Most orders placed before 2:00 PM CST ship the same day.

read more about Shipping Policies