Pump up your marine audio set-up with this BOSS Audio MR1200PA 1200-Watt 4-Channel Marine Amplifier. This amplifier offers a customized experience with built-in PA system for additional convenience.

Delivering 1200 watts of max power, with 2 to 8-ohm range, this 2-channel unit provides the powerful sound you'll love. Complete with a bridgeable design, this boat accessory gives you additional power flexibility. With the variable bass boost, gain controls, low-pass filter, and subwoofer level control, you can customize your listening to your liking for a perfect jam-out session on or off the water. The high and low-level inputs offer optimal versatility, allowing you to build an audio system using virtually any standard factory or aftermarket unit.

This amplifier is designed with a built-in PA system, so wake tower speakers or other stereo speakers can be used to make announcements. This device offers thermal protection to prevent overheating and short circuit protection, automatically cutting the output and remain in that state until the short is resolved.

You'll want to cruise around all the time with this BOSS Audio MR1200PA 1200-Watt 4-Channel Marine Amplifier delivering clear sound, powerful output, and customizable boosts.

• Two-channel amplifier is the perfect addition to your boat for an ultimate listening experience on or off the water with a bridgable design for added versatility
• Weatherproof model provides a total power of 1200 watts with 225 watts x 4 RMS at 2 ohms, 113 watts x 4 RMS at 4 ohms, and up to 450 watts x 2 RMS bridged at 4 ohms
• Includes remote subwoofer control, giving you the ability to boost the sub level when amp and subwoofer are connected to the pre-amp output
• Built-in PA system for making announcements over tower/stereo speakers
• Class A/B stereo amplifier is full-range with MOSFET power supply
• High and low-level outputs allow you to build an audio system using virtually any standard factory or aftermarket source unit
• Fixed high-pass gives you the ability to filter the frequencies that pass through the full-range speakers and variable low-pass filter gives you control over the frequencies that pass through to the subwoofer
• High and low-level inputs allow for versatile use with factory or aftermarket radios
• Variable Bass-boost allows you to adjust the low bass within the boost range for customized sound
• Variable gain control lets you balance the amp's output with the speakers or subs the amp is driving
• Switchable input sensitivity gives you the freedom to connect the amp to any standard source unit
• Thermal protection prevents overheating and short circuit protection automatically cuts the output and remains in that state until the short is resolved
• Features a unique rubber door which tightly seals all control panel openings when not in use
• Channel configuration: 4/3/2 channel
• Frequency response: 6Hz to 50kHz
• Speaker impedance: 2 to 8 ohms
• RCA inputs: 4-channel
• Low-pass filter: 40 Hz to 150 Hz
• High-pass filter: Fixed 200 Hz
• Variable bass boost: 0 to 18 dB
• Color: White
• Dimensions (L x W x H): 12.72 x 7.32 x 2.07 inches

Shipping Information

VMInnovations is proud to offer fast, free shipping every day. Items are typically delivered between 1-3 days.

Most orders placed before 2:00 PM CST ship the same day.

Free Shipping Details

• Our free shipping service is standard ground shipping with FedEx, USPS, or a regional carrier.
• Items are usually delivered in 1-3 days, but some may take up to 5 days.
• Some orders may require a signature before delivery.
• At this time, we only offer free shipping inside the 48 continental United States.
• Free shipping is not available for APO/FPO.
• Some items can be shipped to Alaska, Hawaii, or Puerto Rico. Please note free shipping does not apply to these locations. You will need to select the AK/HI/PR shipping in your cart.
• We are currently unable to ship items internationally.

Freight Shipping Information (LTL)

Some items are too large to be shipped with a regional carrier, FedEx, or USPS, and we ship these items with our freight carriers.

Please read the information below so you fully understand the delivery process and requirements.

Required Actions

We will need your phone number for the delivery. The carrier will need to call you in order to set up a delivery time. Please make sure the number you provide during checkout is the best one to reach you. If paying with PayPal, please make sure the number on your account is accurate.

You'll need to inspect your package upon arrival before you sign. If your order arrives damaged, you should sign "DAMAGED" on the delivery receipt. If the item is damaged to the point that it is not usable, you can refuse the item.

Please notify and, if possible, send photos of any damage to vminnovations_help@email.spreetail.com, along with your order number. A member of our Customer Experience team will reach out to you with further instructions.

Delivery Information

At this time, we do not offer "in-home" deliveries. Your shipment must be delivered to the curbside and will require a signature. Please be sure you are able to move the item after it arrives, as the carrier will not be able to assist.

We do our best to ship orders as fast as we can. If you need to cancel your order, please let us know as soon as possible by calling our Customer Experience team at 866-639-9320. Please note that if we are unable to cancel your order before it ships, you will be responsible for the shipping charges.

If the item is returned from the freight company for any reason other than damage, additional shipping or storage fees may apply. Reasons may include invalid or incorrect address information, and incorrect phone number or contact information, or failing to schedule or missing an already scheduled delivery appointment.

If the item is delivered and a return is requested, the freight shipping fees will be deducted from the final refund amount.