











Kicker 12 Inch 1000W Subwoofer Box + 500W Mono D Amplifier, Remote + Wiring Kit
Description
Loaded, sturdy, and stylishly covered, the Kicker 12 Inch 1000 Watt Subwoofer Enclosure Box comes ready to ride.
With a double stacked magnet, over-sized spider, and larger surround, this subwoofer enclosure provides powerful bass and the thunderous low-end response you crave when the volume knob needs a workout. This 12-inch subwoofer enclosure works best with 500 watts of power, and features 2-ohm impedance and 95 dB of sensitivity.
This package comes complete with a Rockford Fosgate mono D car amplifier rated at 500 Watt x 1 Channel @ 2 Ohms RMS. The amplifier features a MOSFET power supply, cast aluminum heatsink, muted turn-on, short circuit protection, over current protection, RCA pass thru outputs, high level inputs, real time output and power supply thermal sensing, and phase switch. The amplifier is CEA-2006 compliant and comes with a remote bass control.
The wiring kit features high-performance copper wires are wrapped in the durable and flexible SurfaceFlex wire jacket for effective cable routing. The CRB fuse holder has been specially plated with nickel for corrosion protection against the elements. Last but not least, distortion and external noise are reduced to a minimum with the Strand Interaction Conductor.
- Muted turn on
- RCA pass-thru outputs
- High level inputs
- 0/180-degree phase switch
- Real time output and power supply thermal sensing
- Remote bass control included
- 4-gauge power/ground connectors
- CEA-2006 compliant
- Weight: 6 pounds
- Part number: R500X1D
- Warranty: 1-year warranty
- Wiring kit
- Complete 2-channel amplifier wiring kit with cables, connectors, and accessories
- 4-gauge high current power and ground cables with 315 multi-stranded bare copper
- Wire construction in a translucent blue/ black insulation jacket
- 18-gauge remote turn-on wire with solid blue insulation jacket
- 12-gauge high-density 2-conductor copper speaker wire with clear blue insulation jacket
- E.M.I. isolating RCA audio cables with maximum surface contact
- Connection and exclusive VM Audio barrel grip nickel plated, high-impact resistant 60A AGU fuse holder with exclusive 4-gauge
- Maximum wire-to-surface current flow directivity
- 4-gauge nickel-plated power/ ground solderless ring crimp terminals
- 4-gauge nickel-plated power/ ground solderless spade crimp terminals
- Element protection power cable loom jacket
- Quick-connect nickel-plated crimp speaker wire connectors
- High-quality insulated solderless crimp butt terminals
- Short circuit protection
- Over current protection
- Cast aluminum heatsink
- On-board punch EQ with + 18dB boost @ 45Hz
- Loaded subwoofer enclosure
- Kicker 12-Inch 1000 watt vented subwoofer enclosure
- RMS power: 500 watts
- Max power: 1000 watts
- Polypropylene cone
- Ribbed santoprene surround
- Stamped steel basket
- Durable high strength nylon tie wraps
- High temperature voice coils
- Spring loaded push terminals
- Final impedance: 2 ohm
- Sensitivity: 95 dB
- Dimensions: 18.375 x 16 x 11.25 inches / 14.4375 inches (W x H x Top Depth / Bottom Depth)
- Weight: 49 pounds
- Part number: 43VCWR122
- Warranty: 1-year warranty
- Mono amplifier
- Rated power: 250 watts x 1 @ 4 ohms; 500 watts x 1 @ 2 ohms
- Dynamic power: 333 Watts x 1 @ 4 ohms 0 degree res; 647 watts x 1 @ 2 ohms 0 degree Res
- Class D, MOSFET power supply
- 12dB / octave Butterworth crossover
- Double stacked magnet
- Cable firewall black rubber grommets
- Technical specifications:
- Type: 2-channel
- Amplifiers supported: Single amplifier
- Power/ ground wire size: 4-gauge
- Strand count: 315
- Power wire length: 16 feet
- Ground wire length: 3 feet
- Speaker wire size: 12-gauge
- Speaker wire length: 20 feet
- Remote wire size: 18-gauge
- Remote wire length: 15 feet
- RCA cable length: 15 feet
- Fuse holder: AGU
- Fuse size: 60A
- Wire ties: 20
- Ring connectors: 2
- Ring spade terminals: 5
- Butt connectors: 3
- Split loom tubing
- Screws: 3
- Fasten connectors: 4
- Part number: VM-SRSK4B
- Warranty: 1-year warranty
- Spade connectors: 2
Shipping & Returns
Shipping Information
VMInnovations is proud to offer fast, free shipping every day. Items are typically delivered between 1-3 days.
Most orders placed before 2:00 PM CST ship the same day.
Related Products
If you have any questions, you are always welcome to contact us. We'll get back to you as soon as possible, within 24 hours on weekdays.
-
Shipping Information
Use this text to answer questions in as much detail as possible for your customers.
-
Customer Support
Use this text to answer questions in as much detail as possible for your customers.
-
FAQ’s
Use this text to answer questions in as much detail as possible for your customers.
-
Contact Us
Use this text to answer questions in as much detail as possible for your customers.

