Kicker DC122 Dual 12" 600 Watt Car Subwoofers + Enclosure + 2000W Amp + Amp Kit

**Please check your dimensions to make sure it fits in your vehicle, box dimensions are 32 3/8" W x 16" H x 17 3/8" D (Bottom) x 13 15/16" D (Top)**

Add rich bass sounds to your car's audio system with this Kicker DC12 600 Watt Subwoofer Enclosure. Offering a 600 Watt MAX and a 300 Watt RMS, this Kicker DC12 has a final impedance of 2 Ohm, a frequency response of 27 500Hz and a sensitivity of 86.2 dB. Its oversized ports with flared ends give this Kicker DC12 efficient air flow and no noise.

This Kicker DC12 offers easy to use impedance designated at the terminal cup assembly, and its injection molded, polypropylene cone with bracing eliminates distortion. This enclosure measures 32 3/8" W x 16" H x 17 3/8" D (Bottom) x 13 15/16" D (Top) and is covered in dense gray carpeting.

This VM Audio Amplifier offers an RMS power rating of 1000 watts x 1 channel at 4 Ohm and a peak power of 2000 watts x 1 channel at 2 Ohm. Its extremely low noise and distortion means this amplifier runs quietly and efficiently, and it offers a dedicated soft turn on circuit.

The Fidelity Class A/B Circuitry delivers precise half signal transitions with low heat generation. Signals are reproduced separately and joined together to complete the full signal. Measuring 13.54"L x 9.65" W x 2.17" H, this amplifier can fit in slim spaces.

Includes: **New VM Audio SRPK4R 4 Gauge Amplifier Complete Wiring Kit**

@[Video](gOAwG16YZSM)

• **Subwoofers:**
• NEW **KICKER DC12** 12" 600 WATT Car Subwoofer Enclosure
• 600 Watt MAX
• 300 Watt RMS
• Final Impedance: 2 Ohm
• Frequency response: 27 500 Hz
• Sensitivity: 86.2 dB
• Oversized Ports With Flared Ends For Efficient Air Flow and No Noise
• Nickel Plated Push Terminals
• Double Stitched Surround for Enhanced Durability
• Single High Temp. Voice Coil
• Optimized Polyfoam Ribbed Surround
• World’s best bass value, and ready to drop in a trunk
• Ready made, outrageous KICKER bass
• Easy to use impedance designated at the terminal cup assembly
• Injection molded, polypropylene cone with bracing eliminates distortion
• Tough KICKER wood enclosure
• Dense gray carpeting
• Enclosure Dimensions: 32 3/8" W x 16" H x 17 3/8" D (Bottom) x 13 15/16" D (Top)
• Part Number: **43DC122**
• 2 Year VMinnovation Warranty
• **VM Audio EXA2000.1 Class A/B Mono Block 2000W**
• Power Amplifier
• Type: Mosfet
• Channels: 1
• Total Power 2000W
• RMS Power @ 4 Ohm: 1000Wx1
• Peak Power @ 2 Ohm: 2000Wx1
• Peak Power @ 4 Ohm Bridged: NA
• Minimum Impedance Unbridged: 2
• Minimum Impedance Bridged: NA
• Frequency Response: 10Hz 250kHz
• Single to Noise Ratio: 93dB
• Circuit Type: A/B
• Protection Circuit: 5 Way
• Low/Highpass Crossover: 50Hz 250Hz
• Preamp Outputs: 1 Pair
• Bass Boost: 0dB 12db
• Bass/Gain Remote: Yes
• Power Indicator: Yes
• Terminals: Nickel Plated
• Power /Ground Connection: 4 Gauge
• Input Voltage: 14.4V
• Fuse: 2x30A
• Dimensions: 13.54"L x 9.65" W x 2.17" H
• Warranty: 1 Year
• **Amp Kit:**
• New VM Audio SRPK4R **4 Gauge Amplifier Complete Wiring Kit**
• Maximum of 2000 watts
• Complete amplifier wiring kit with cables, connectors and accessories
• 4 Gauge high current power cables with 315 multi stranded bare copper
• 4 Gauge high current ground cables with 315 multi stranded bare copper
• 18 Gauge remote turn on wire with solid red insulation jacket
• 12 Gauge high density two conductor copper speaker wire with clear red insulation jacket
• E.M.I isolated RCA audio cables with maximum surface contact connection and exclusive VM audio barrel grip
• Nickel plated, high impact resistant 60 AGU fuse holder with exclusive 4 Gauge maximum wire to surface current flow directivity
• 4 Gauge nickel plated power/ground solder less ring crimp terminals
• 4 Gauge nickel plated power/ground solder less spade crimp terminals
• Quick connect nickel plated crimp speaker wire connector
• Element protection power cable loom jacket
• High quality insulated solder less crimp butt terminals
• Durable high strength nylon tie wraps
• Kit includes:
• 16 Ft red 4 gauge power wire
• 3 ft black 4 gauge ground wire
• 15 ft high performance RCA wire
• 4 Gauge In line AGU fuse holder
• 60 Amp AGU fuse
• 15 ft 18 Gauge Remote wire
• 20 ft 12 gauge Speaker wire
• 20) 6" wire ties
• 2) spade connectors
• 2) ring connectors
• 3) screws
• 3) butt connectors
• 4) fasten connectors
• 5) spade connectors
• Cable firewall black rubber grommets
• Product Condition: Brand New
• Part Number: SRPK4R
• 1 Year Manufacturer Warranty

Shipping Information

VMInnovations is proud to offer fast, free shipping every day. Items are typically delivered between 1-3 days.

Most orders placed before 2:00 PM CST ship the same day.

read more about Shipping Policies