MTX 12" Dual Loaded Car Subwoofer w/ Sub Box, Amplifier, & QPower Wiring Amp Kit

If you're looking to beat out your friends, then the MTX 12" Dual Loaded Car Subwoofer w/ Sub Box, Amplifier, & QPower Wiring Amp Kit is for you.

This package comes with MTX 12" Dual Loaded Car Subwoofer, Sub Box, Amplifier, and QPower Wiring Amp Kit. The MTX Terminator series subwoofer system includes 2 subs, sub enclosure and a car amp. With 1200 max power, it gives off super deep bass sounds, while keeping maximum sound quality. All you need to complete this subwoofer package is an amp wiring kit.

Get your amplifier hooked up to the rest of your car audio with quality parts in no time with this Q Power Super Flex 4 Gauge 3000 Watt Amplifier Wiring Kit. This wiring kit has everything you need to get your amplifier and car audio hooked up, from power cables to speaker wire, RCA to terminals, and wire ties to fuses. The entire kit is compatible for 4 gauge installation and can handle up to 3000 watts of power.

So get the party started in your car and add some bass with the MTX 12" Dual Loaded Car Subwoofer w/ Sub Box, Amplifier, & QPower Wiring Amp Kit.

• This package comes with MTX 12" Dual Loaded Car Subwoofer, Sub Box, Amplifier, and QPower Wiring Amp Kit
• MTX 12 inch 1200 watt dual bass package
• Box content:
• 2 MTX subwoofers
• MTX subwoofer enclosure
• MTX Terminator TNA251 amp
• Subwoofer enclosure:
• Dual 12 inch loaded subwoofer enclosure
• 2 12 inch Terminator series subwoofers
• Max power: 1200 watt
• RMS power: 600 watt
• Aluminum voice coils
• Single 4 ohm voice coils per sub (pre wired down to 2 ohm load)
• MTX logo on dustcap
• Rubber surround
• Polypropylene cone
• 48 ounce magnet (each)
• Frequency response : 37 150Hz
• 5/8 inch MDF solid construction
• Aviation grade black carpet
• "Terminator" logo in the carpet
• Dimensions (HxWxD) : 13.875 x 29.625 x 13.875 inches
• Amplifier:
• Terminator Series TNA251250 Watt Mono D Car Power Amplifier
• 1 channel x 500 watt @ 2 ohm max
• 1 channel x 250 watt @ 2 ohm RMS
• 1 channel x 150 watt @ 4 ohms RMS
• Adaptive D channel MOSFET design
• Variable low pass 12dB/octave from 40Hz 400Hz
• Variable high pass 12dB/octave from 40Hz 400Hz
• Low pass crossover
• Bass boost
• THD+N (1 watt): 1 percent
• Fuse rating: 30A x 2
• Maximum input signal: 6V
• Maximum sensetivity: 100mV
• Frequency response: 20Hz 30.000Hz
• Remote bass control included
• CEA 2006 compliant amplifier
• 8 gauge power/ground leads recommended
• Dimensions: 12.25 x 7.125 x 2.25 inches
• Manufacturer warranty: 1-year warranty
• MTX TNP212D2 (1 Pack)
• Part Number: TNP212D2
• Quantity: 1
• QPower 4GAMPKIT-SFLEX (1 Pack)
• Super Flex amp kit
• Handles up to 3000 watts of power
• 4 gauge wiring
• Ready for complete amplifier installation
• Get your amplifier wired up and ready to go in no time
• Kit includes:
• Deluxe high quality fuse holder
• Gold plated ANL fuse (100 amps)
• 17 feet of 4 gauge Super Flex orange power cable
• 3 feet of 4 gauge Super Flex blue power cable
• 17 feet of 18 gauge blue turn on wire
• 25 feet of 16 gauge Super Flex speaker wire
• 17 feet of deluxe RCA interconnect
• 3 grommets
• 5/16 inch gold plated ring terminal
• 1/4 inch gold plated ring terminal
• Number 10 gold plated ring terminal
• 4 gold plated speaker terminals
• 20, 4 inch wire ties
• Dimensions: 13 x 8 x 3 inches
• Weight: 2.6 pounds
• Manufacturer warranty: 1-year warranty
• Part Number: 4GAMPKIT-SFLEX
• Quantity: 1

Shipping Information

VMInnovations is proud to offer fast, free shipping every day. Items are typically delivered between 1-3 days.

Most orders placed before 2:00 PM CST ship the same day.

read more