MTX 12 Inch Dual Car Subwoofer Audio, Sub Box, & Amplifier Bundle w/ Wiring Kit

If you're looking to beat out and jam louder than all your friends, then the MTX 12-Inch Dual Subwoofer Kit bundled with the BOSS installation wiring kit is for you.

This MTX Terminator series subwoofer system includes 2 subs, a sub box enclosure, and a car amplifier. With 1200 watts of max power, this subwoofer system gives off super deep bass sounds while keeping maximum sound quality. Complete your car audio set up with ease thanks to the BOSS Audio Systems KIT2 8-Gauge Complete Car Amplifier Installation Wiring Kit.

Give your car audio system and get the party started by adding some bass with the MTX Party Pack.

• Bundle includes MTX Dual 12-Inch Subwoofers Package and BOSS Audio Systems KIT2 8 Gauge Complete Car Amplifier Installation Wiring Kit
• 1200 watt dual bass package includes 2 MTX subwoofers, 1 MTX subwoofer enclosure, and 1 MTX Terminator TNA251 amplifier
• Rubber surrounds are long-lasting, ensuring your kit is protected for years
• Complete 8-gauge wiring kit includes a 20-foot red power cable, a 3-foot black ground cable, a 16-foot blue turn-on wire, and a high-performance RCA interconnect
• 20, 4-inch wire ties, 3 rubber grommets, 5/16-inch ring terminals, 1/4-inch ring terminals, and 4 speaker terminals are included to help with secure placement and hold
• MTX 12 inch 1200 watt dual bass package
• Additional subwoofer enclosure features:
• Dual 12 inch loaded subwoofer enclosure
• 2 12-inch Terminator series subwoofers
• Max power: 1200 watt
• RMS power: 600 watt
• Aluminum voice coils
• Single 4 ohm voice coils per sub (pre wired down to 2 ohm load)
• MTX logo on dustcap
• Polypropylene cone
• 48 ounce magnet (each)
• Frequency response : 37 150Hz
• 5/8 inch MDF solid construction
• Aviation grade black carpet
• "Terminator" logo in the carpet
• Dimensions (HxWxD) : 13.875 x 29.625 x 13.875 inches
• Additional amplifier features:
• Terminator Series TNA251 600 Watt Max Mono D Car Power Amplifier
• 1 channel x 500 watt @ 2 ohm max
• 1 channel x 250 watt @ 2 ohm RMS
• 1 channel x 150 watt @ 4 ohms RMS
• Adaptive D channel MOSFET design
• Variable low pass 12dB/octave from 40Hz 400Hz
• Variable high pass 12dB/octave from 40Hz 400Hz
• Low pass crossover
• Bass boost
• THD+N (1 watt): 1 percent
• Fuse rating: 30A x 2
• Maximum input signal: 6V
• Maximum sensetivity: 100mV
• Frequency response: 20Hz 30.000Hz
• Remote bass control included
• CEA 2006 compliant amplifier
• 8 gauge power/ground leads recommended
• Part number: TNP212D2
• Dimensions: 12.25 x 7.125 x 2.25 inches
• Manufacturer warranty: 1-year warranty
• Complete 8-gauge wiring kit for car audio amplifier installation
• 20-foot, 8-gauge red power cable, high-quality competition fuse holder
• 3-foot, 8-gauge black ground cable
• 16-foot, 18-gauge blue turn-on wire; 30-foot, 16-gauge speaker wire
• 20-foot high-performance RCA interconnect, 6-foot split loom tubing
• 20, 4-inch wire ties; 3 rubber grommets
• 5/16-inch ring terminals, 1/4-inch ring terminals, 4 speaker terminals
• Part number: KIT2
• Weight: 2 pounds
• Manufacturer warranty: 1-year warranty

Shipping Information

VMInnovations is proud to offer fast, free shipping every day. Items are typically delivered between 1-3 days.

Most orders placed before 2:00 PM CST ship the same day.

read more