MTX Dual 12" Subwoofers and Amplifier Package with AKS8 Wiring Kit & Capacitor

If you're looking to beat out your friends, then the MTX 12-inch subwoofer kit is for you.

This MTX Terminator series subwoofer system includes 2 subs, sub-enclosure and a car amp. With 1200 max power, it gives off super-deep bass sounds, while keeping maximum sound quality. All you need to complete this subwoofer package is an amp wiring kit.

The AKS8 8 Gauge amplifier installation kit has everything you need to install your amplifier in your car. The amp kit features a 20-foot 8-gauge red power cable, competition high quality fuse holder, 3-feet of 8-gauge black ground cable, 16-feet of 18-gauge blue turn-on wire, a 20-foot high performance RCA interconnect, 30-feet of speaker wire, 6-feet of split loom tubing, 20, 4-inch wire ties, 3, rubber grommets, a Number 10 ring terminal, a 5/16-inch ring terminal, and a 1/4-inch ring terminal.

The Bullz Audio 2.2-Farad Car Audio Capacitor has an equivalent series resistant of 0.00195 Ohms at 120 Hz and 25 degrees C. This capacitor has a low level input voltage of 20 volts and a high input voltage of 24 volts. This is a remote terminal screw-in capacitor that measures 10.3 x 3 x 3 inches.

Get more performance out of your car audio with this complete kit.

• MTX 12-inch 1200 watt dual bass package
• Box content:
• 2 MTX subwoofers
• MTX subwoofer enclosure
• MTX Terminator TNA251 amp
• Subwoofer enclosure:
• Dual 12-inch loaded subwoofer enclosure
• 2 12-inch Terminator series subwoofers
• Max power: 1200 watt
• RMS power: 600 watt
• Aluminum voice coils
• Single 4 ohm voice coils per sub (pre-wired down to 2 ohm load)
• MTX logo on dustcap
• Rubber surround
• Polypropylene cone
• 48 ounce magnet
• Frequency response : 37-150Hz
• 5/8-inch MDF solid construction
• Aviation grade black carpet
• "Terminator" logo in the carpet
• Dimensions (HxWxD) : 13.875 x 29.625 x 13.875 inches
• Amplifier:
• Terminator Series TNA251 600 Watt Max Mono D Car Power Amplifier
• 1 channel x 500 watt @ 2 ohm max
• 1 channel x 250 watt @ 2 ohm RMS
• 1 channel x 150 watt @ 4 ohms RMS
• Adaptive D channel MOSFET design
• Variable low pass 12dB/octave from 40Hz
• 400Hz
• Variable high pass 12dB/octave from 40Hz
• 400Hz
• Low pass crossover
• Bass boost
• THD+N (1 watt): 1-percent
• Fuse rating: 30A x 2
• Maximum input signal: 6V
• Maximum sensetivity: 100mV
• Frequency response: 20Hz
• 30.000Hz
• Remote bass control included
• CEA-2006 compliant amplifier
• 8 gauge power/ground leads recommended
• Dimensions: 12.25 x 7.125 x 2.25 inches
• Part number: TNP212D2
• Warranty: 1-year warranty
• Wiring kit
• 20 foot 8-gauge red power cable
• Competition high-quality fuse holder
• 0.25-inch gold-plated ring terminal
• 3 foot 8-gauge black ground cable
• Number 10 gold-plated ring terminal
• 16 foot 18-gauge blue turn-on wire
• 20 foot high performance RCA interconnect
• 3 rubber grommets
• 30 foot speaker wire
• 0.3125-inch gold-plated ring terminal
• 6 foot split loom tubing
• 20, 4-inch wire ties
• Part number: AKS8
• Warranty: 1-year warranty
• Digital capacitor
• Digital Voltage Display
• Does not include regulator/resistor
• Capacitance: 2.2-farad, 2.2 million microfarad
• Low ESR
• 20 VDC Surge
• Warranty: 1-year warranty

Shipping Information

VMInnovations is proud to offer fast, free shipping every day. Items are typically delivered between 1-3 days.

Most orders placed before 2:00 PM CST ship the same day.

read more about Shipping Policies