The MTX TNE212D combines great subwoofer design with perfect enclosure design to deliver bass that far exceeds expectations. The unit is a dual 12 inch sealed enclosure that has a single terminal cup showing a final 2O load to any connected amplifier. This kit comes complete with a 1500W monoblock A/B amplifier, wiring kit, and 2 farad capacitor.

The Terminator subwoofers used in the enclosure include durable polypropylene dust caps that can survive the rigors of most trunks and are lightweight, allowing them to efficiently move using less power.

Each subwoofer can handle 200 watts RMS power, resulting in a power level of 400 watts RMS/800 watts peak for the entire enclosure. The subwoofers also incorporate Spider Plateau Venting, which is a mechanical cooling process that allows the subwoofer to continually refresh the air around the voice coil and dissipate heat. The enclosure itself is made of extra strength 5/8 inch MDF.

Have everything you need to achieve audio perfection with the included 1500 watt, Monoblock A/B amplifier, wiring kit, and 2 farad capacitor as well.

• Loaded subwoofer enclosure
• 1200 watt of max power, 400 watts RMS
• Rubber surround
• Polypropylene cone
• MTX audio logo on dustcap
• 2 inch aluminum single 4 ohms voice coil
• 48 ounce magnet
• Final impedance: 2 ohms
• Frequency response: 37 150 Hz
• 5/8 inch solid MDF construction
• Black carpeting covering the enclosure
• Terminator logo embroidered into carpet front
• Dimensions: 29.69 x 13.5 x 11.125 x 14 inches
• Warranty: 1 year
• Amplifier
• RMS power: 563 watts x 1 channel @ 4 ohms; 1125 watts x 1 channel @ 2 ohms
• Max power: 1500 watts x 1 channel @ 2 ohms
• 2 ohm stable monoblock
• High/low crossover
• Variable low pass crossover: 40 150Hz
• Fixed high pass crossover (200Hz)
• Variable 0 to +18dB bass boost
• Variable input gain control
• Power and protection LED indicators
• Thermal, overload and speaker short protection
• Line and speaker level inputs
• Chrome plated RCA connectors and screw terminals
• Frequency response: 9Hz 150Hz (+/ 3dB)
• Signal to noise ratio 105dB
• THD at RMS output 0.01%
• Damping factor: 125+
• Remote control included
• Dimensions: 15.5 x 10 x 2.375 inches
• Warranty: 1 year
• Wiring kit
• 20 foot 8 gauge red power cable
• Competition high quality fuse holder
• 0.25 inch gold plated ring terminal
• 3 foot 8 gauge black ground cable
• Number 10 gold plated ring terminal
• 16 foot 18 gauge blue turn on wire
• 20 foot high performance RCA interconnect
• 3 rubber grommets
• 30 foot speaker wire
• 0.3125 inch gold plated ring terminal
• 6 foot split loom tubing
• 20, 4 inch wire ties
• Warranty: 1 year
• Capacitor
• Equivalent Series Resistance (ESR): 0.00195 ohms @ 120 Hz @ 25 degrees C
• High level input voltage: 24
• Percent capacitance tolerance: 10
• Low level input voltage: 20 volts
• Remote terminal screw
• Capacitance: 2 farad, 2 million microfarad
• Weight: 3 LBS
• Product Condition: Brand New
• Part Number: BCAP2.2
• 2 Year Warranty: (1 Year Manufacturer Warranty + 1 Year VMInnovations Warranty!)

Shipping Information

VMInnovations is proud to offer fast, free shipping every day. Items are typically delivered between 1-3 days.

Most orders placed before 2:00 PM CST ship the same day.

Free Shipping Details

• Our free shipping service is standard ground shipping with FedEx, USPS, or a regional carrier.
• Items are usually delivered in 1-3 days, but some may take up to 5 days.
• Some orders may require a signature before delivery.
• At this time, we only offer free shipping inside the 48 continental United States.
• Free shipping is not available for APO/FPO.
• Some items can be shipped to Alaska, Hawaii, or Puerto Rico. Please note free shipping does not apply to these locations. You will need to select the AK/HI/PR shipping in your cart.
• We are currently unable to ship items internationally.

Freight Shipping Information (LTL)

Some items are too large to be shipped with a regional carrier, FedEx, or USPS, and we ship these items with our freight carriers.

Please read the information below so you fully understand the delivery process and requirements.

Required Actions

We will need your phone number for the delivery. The carrier will need to call you in order to set up a delivery time. Please make sure the number you provide during checkout is the best one to reach you. If paying with PayPal, please make sure the number on your account is accurate.

You'll need to inspect your package upon arrival before you sign. If your order arrives damaged, you should sign "DAMAGED" on the delivery receipt. If the item is damaged to the point that it is not usable, you can refuse the item.

Please notify and, if possible, send photos of any damage to vminnovations_help@email.spreetail.com, along with your order number. A member of our Customer Experience team will reach out to you with further instructions.

Delivery Information

At this time, we do not offer "in-home" deliveries. Your shipment must be delivered to the curbside and will require a signature. Please be sure you are able to move the item after it arrives, as the carrier will not be able to assist.

We do our best to ship orders as fast as we can. If you need to cancel your order, please let us know as soon as possible by calling our Customer Experience team at 866-639-9320. Please note that if we are unable to cancel your order before it ships, you will be responsible for the shipping charges.

If the item is returned from the freight company for any reason other than damage, additional shipping or storage fees may apply. Reasons may include invalid or incorrect address information, and incorrect phone number or contact information, or failing to schedule or missing an already scheduled delivery appointment.

If the item is delivered and a return is requested, the freight shipping fees will be deducted from the final refund amount.