The MTX TNE212D combines great subwoofer design with perfect enclosure design to deliver bass that far exceeds expectations. The unit is a dual 12-inch sealed enclosure that has a single terminal cup showing a final 2O load to any connected amplifier. This kit comes complete with a 1500W monoblock A/B amplifier and 2-farad capacitor.

The Terminator subwoofers used in the enclosure include durable polypropylene dust caps that can survive the rigors of most trunks and are lightweight, allowing them to efficiently move using less power.

Each subwoofer can handle 200 watts RMS power, resulting in a power level of 400 watts RMS/800 watts peak for the entire enclosure. The subwoofers also incorporate Spider Plateau Venting, which is a mechanical cooling process that allows the subwoofer to continually refresh the air around the voice coil and dissipate heat. The enclosure itself is made of extra-strength 5/8-inch MDF.

Have everything you need to achieve audio perfection with the included 1500-watt, Monoblock A/B amplifier and 2-farad capacitor as well.

• Loaded subwoofer enclosure
• 1200 watt of max power, 400 watts RMS
• Rubber surround
• Polypropylene cone
• MTX audio logo on dustcap
• 2-inch aluminum single 4 ohms voice coil
• 48-ounce magnet
• Final impedance: 2 ohms
• Frequency response: 37-150 Hz
• 5/8-inch solid MDF construction
• Black carpeting covering the enclosure
• Terminator logo embroidered into carpet front
• Dimensions: 29.69 x 13.5 x 11.125 x 14 inches
• Warranty: 1-year warranty
• Amplifier
• Armor 1500W Monoblock, Class A/B Amplifier with subwoofer control remote and an 8-gauge amplifier wiring installation kit
• MOSFET superior power supply requires less current to operate
• 2-Ohm stable to produce more power resulting in more volume
• Switchable bass boost allows you to boost the low bass +18 dB
• Variable gain control lets you balance the amps output with the speakers or sub the amp is driving
• Variable low-pass filter lets you control the frequencies that pass through the subwoofer
• High and low level inputs provide flexibility with high-level inputs from the speakers and low-level RCA inputs accept the signal from pre-amp
• Thermal protection circuit turns the amp off and allows it to cool down before turning it back on
• Subwoofer level control gives you the ability to boost or attenuate the sub level when an amp and subwoofer are connected to the pre-amp output
• Specifications:
• Power handling:
• Total power output: 1500 watts
• Peak power: 1500 watts x 1 @ 2 Ohms
• RMS power: 1125 watts x 1 @ 2 Ohms
• Peak power: 750 watts x 1 @ 4 Ohms
• RMS power: 563 watts x 1 @ 4 Ohms
• Signal to noise ratio: 105 dB
• Frequency response: 9 Hz to 50 kHz ±1 dB
• Impedance: 2 to 8 Ohms
• T.H.D: 0.01 percent
• RCA inputs: 2-channel
• Low-pass filter: 35 Hz to 160 Hz
• Bass boost: Switchable to 0 or 18 dB
• Dimensions: 10.31 x 6.5 x 2.56 inches
• Warranty: 1-year warranty
• Capacitor
• Digital Voltage Display
• Remote terminal screw
• Capacitance: 2-farad, 2 million microfarad
• High-level input voltage: 20
• Low ESR
• Finish color: Black
• Warranty: 1-year warranty

Shipping Information

VMInnovations is proud to offer fast, free shipping every day. Items are typically delivered between 1-3 days.

Most orders placed before 2:00 PM CST ship the same day.

Free Shipping Details

• Our free shipping service is standard ground shipping with FedEx, USPS, or a regional carrier.
• Items are usually delivered in 1-3 days, but some may take up to 5 days.
• Some orders may require a signature before delivery.
• At this time, we only offer free shipping inside the 48 continental United States.
• Free shipping is not available for APO/FPO.
• Some items can be shipped to Alaska, Hawaii, or Puerto Rico. Please note free shipping does not apply to these locations. You will need to select the AK/HI/PR shipping in your cart.
• We are currently unable to ship items internationally.

Freight Shipping Information (LTL)

Some items are too large to be shipped with a regional carrier, FedEx, or USPS, and we ship these items with our freight carriers.

Please read the information below so you fully understand the delivery process and requirements.

Required Actions

We will need your phone number for the delivery. The carrier will need to call you in order to set up a delivery time. Please make sure the number you provide during checkout is the best one to reach you. If paying with PayPal, please make sure the number on your account is accurate.

You'll need to inspect your package upon arrival before you sign. If your order arrives damaged, you should sign "DAMAGED" on the delivery receipt. If the item is damaged to the point that it is not usable, you can refuse the item.

Please notify and, if possible, send photos of any damage to vminnovations_help@email.spreetail.com, along with your order number. A member of our Customer Experience team will reach out to you with further instructions.

Delivery Information

At this time, we do not offer "in-home" deliveries. Your shipment must be delivered to the curbside and will require a signature. Please be sure you are able to move the item after it arrives, as the carrier will not be able to assist.

We do our best to ship orders as fast as we can. If you need to cancel your order, please let us know as soon as possible by calling our Customer Experience team at 866-639-9320. Please note that if we are unable to cancel your order before it ships, you will be responsible for the shipping charges.

If the item is returned from the freight company for any reason other than damage, additional shipping or storage fees may apply. Reasons may include invalid or incorrect address information, and incorrect phone number or contact information, or failing to schedule or missing an already scheduled delivery appointment.

If the item is delivered and a return is requested, the freight shipping fees will be deducted from the final refund amount.