










New VM Audio EXA2000.4 2000W 4 Channel Car Amplifier Power Amp + Wiring Kit
Description
**VM Audio EXA2000.4 4 Channel Car Amplifier**
----------------------------------------
The most advanced and innovative technologies with meticulous design and engineering give the Elux Fidelity Class A/B Power Amplifier a level of sophistication like no other. A/B Topology ensures crystal clear sound, separating positive and negative signals with incredibly accurate precision. Our V-MOSFET engine provides high-powered, dynamic headroom with little heat or distortion. Fast acting DC-DC power conversion creates stable DC voltages in a more efficient manner. The Self-Guard Five-Way Protection guards against overheating, short-circuiting, over-current and under-voltage.
----------
Our Elux Series Fidelity Class A/B Power Amplifiers not only boost the level of sound decibels, but more importantly, boost the quality of listening experience. Experience the difference in power and clarity in your music with VM Audio’s Elux Series Fidelity Class A/B Power Amplifiers.
- ALUMINUM / DIECAST HEATSINK DESIGN
The aluminum outer case provides a heatsink which helps to dissipate heat. The aluminum outer case maintains a safe temperature, pylling heat from the interior at the prolonged, louder volumes. Vertical diecast fins increase heat
- HIGH-GRADE COMPONENTS
Our Elux Amplifiers feature a doubled sided PCB board, V-Mosfets, TFY capacitors and an efficient power supply—the highest quality electronics for the purest signal. These components will ensure that the amplifiers will handle extreme amounts of power with long-lasting durability.
- FIDELITY CLASS A/B CIRCUITRY
The Fidelity Class A/B Circuitry delivers precise half-signal transitions with low heat generation.
Signals are reproduced separately and joined together to complete the full signal.
- V-MOFSET LOW DISTORTION OUTPUT STAGE
The Output stage provides consistent, stable, high-powered and dynamic headroom with less heat and distortion. This allows for high-switching speed as well as more efficient signal response.
- **VM Audio Elux EXA2000.4 Class A/B 2/3/4 Channel 2000W **
- Power Amplifier
- Type: Mosfet
- Channels: 4
- Total Power 2000W
- RMS Power @ 4 Ohm: 250Wx4
- Peak Power @ 2 Ohm: 500Wx4
- Peak Power @ 4 Ohm Bridged: 1000Wx2
- Minimum Impedance Unbridged: 2
- Minimum Impedance Bridged: 4
- Frequency Response: 20Hz-20kHz
- Single to Noise Ratio: 105dB
- Circuit Type: A/B
- Protection Circuit: 5 Way
- Low/Highpass Crossover: 50Hz-250Hz
- Preamp Outputs: 1 Pair
- Bass Boost: 0dB-12db
- Bass/Gain Remote: NA
- Power Indicator: Yes
- Terminals: Nickel Plated
- Power /Ground Connection: 4 Gauge
- Input Voltage: 14.4V
- Fuse: 2x25A
- Dimensions: 14.33"L x 9.65" W x 2.17" H
- Warranty: 1 Year
- **VM Audio VM-SRSK4B Amplifier Wiring Kit**
- Amplifiers Supported: Single Amplifier
- Power/Ground Wire Size: 4 Gauge
- Strand Count: 315
- Power Wire Length: 16Ft
- Ground Wire Length: 3Ft
- Speaker Wire Size: 12 Gauge
- Speaker Wire Length: 20Ft
- Remote Wire Size: 18 Gauge
- Remote Wire Length: 15Ft
- RCA Cable Length: 15Ft
- Fuse Holder: AGU
- Fuse Size: 60A
- Wire Ties: 20
- Spade Connectors: 2
- Ring Connectors: 2
- Ring Spade Terminals: 5
- Butt Connectors: 3
- Split Loom Tubing: Yes
- Screws: 3
- Fasten Connectors: 4
Shipping & Returns
Shipping Information
VMInnovations is proud to offer fast, free shipping every day. Items are typically delivered between 1-3 days.
Most orders placed before 2:00 PM CST ship the same day.
Related Products
If you have any questions, you are always welcome to contact us. We'll get back to you as soon as possible, within 24 hours on weekdays.
-
Shipping Information
Use this text to answer questions in as much detail as possible for your customers.
-
Customer Support
Use this text to answer questions in as much detail as possible for your customers.
-
FAQ’s
Use this text to answer questions in as much detail as possible for your customers.
-
Contact Us
Use this text to answer questions in as much detail as possible for your customers.

