VM Audio Car Stereo Kit 800W Sub 500W 2 Channel Amplifier Capacitor Wiring Kit

Get the deep bass sounds you're looking for with this **VM Audio 10" Subwoofer**. This High Performance subwoofer offers RMS power of 400 watts and a MAX power of 800 watt. Featuring a harsh weather resistant wide rubber surround, a compliance controlled large damping poly cotton spider and an aerodynamic, direct voice coil surface cooling system, this VM Audio 10" Subwoofer is a great addition to almost any car audio system.

This **VM Audio 10" Subwoofer** offers a single 2 Ohm/8 Ohm or dual 4 Ohm configurable impedances, a sensitivity of 86 dB and a frequency response of 30Hz 500Hz. With a mounting depth of 4.72", this VM Audio 10" Subwoofer also offers a sleek design that adds style to any system.

• Designer Inspired, Custom Tooled Stamp Steel Basket
• Vibraducer Feather Light IMPP Mass Cone

VM Audio: The Passion of Sound

• **Subwoofer**
• BRAND NEW VM Audio SRW10 10" 800 Watt Car Subwoofer
• 10” High Performance Subwoofer
• RMS Power: 400 Watts
• Peak Power: 800 Watts
• Dual Voice Coil Low Frequency Subwoofer
• Long Displacement Stable Mechanical Suspension System
• Harsh Weather Resistant Wide Rubber Surround
• Compliance Controlled Large Damping Poly Cotton Spider
• Vibraducer Feather Light IMPP Mass Cone
• Designer Inspired, Custom Tooled Stamp Steel Basket
• High, Impact Resistant One Piece Magnet Cap
• Aerodynamic, Direct Voice Coil Surface Cooling System
• Extended, Vented Pole Piece Motor Cooling Structure
• Heavy Duty Nickel Plated Wire Connection Push Terminals
• Spider Woven High Conducting Silver Tinsel Leads
• Mounting Guided Tall Beveled Color Matching Trim Ring
• Sealed or Ported Enclosure Performance
• Single 2O/8O or Dual 4O Configurable Impedances
• Sensitivity (1W/1M): 86dB
• Frequency Response: 30Hz – 500Hz
• Mounting Depth: 4.72” (120mm)
• Product Condition: Brand New
• Part Number: SRW10
• 1 Year Manufacturer's Warranty
• **Amplifier**
• New VM Audio SRA500.2 500 Watt 2 Channel Car Amplifier
• RMS Power Rating:
• 120 Watt x 2 Channel @ 4 Ohm
• Peak Power:
• 250 Watt x 2 Channel @ 2 Ohm
• 500 Watt x 1 Channel @ 4 Ohm Bridged
• 500 Watt Max
• 2/1 Channel Power Amplifier
• Class A/B Amplifier Circuit Technology
• Extremely Low Noise and Distortion
• Efficient DC to DC PWM MOSFET Power Supply
• Supreme MOSFET Output Stage
• Power and Protect LED Indicator
• Unbalanced Input Stage Circuitry
• Dedicated Soft Turn On Circuit
• Discrete Signal Processing Stages
• Non Fading Pre Amp Stereo Outputs
• 3 Way Protection Circuitry (Thermal, Over Current, Over Voltage)
• Variable Input Gain Control Adjustment
• Low/Highpass Select Crossover Filter
• Bypass Crossover Switch
• Continuous Variable Lowpass Crossover (50Hz 250Hz)
• Continuos Bass Boost Adjustement (0dB 12dB)
• Nickel Plated Brass Block Terminals
• Frequency Response: 20Hz 20kHz
• Signal to Noise Ratio: >105dB
• Fuse: 30A
• 8 Gauge Power and Ground Wiring is Recommended for Installation
• Dimensions: 8.66"L x 9.76" W x 2.40" H
• Product Condition: Brand New
• Part Number: SRA500.2
• 1 Year Manufacturer Warranty
• **Capacitor**
• **New VM Audio SRCAP2.0 2 Farad Car Hybrid Digital Capacitor**
• 2 Farad High Energy Electrolytic Capacitor
• 2000W Stabilizing Amplifier Flow Capacity
• High Strength Cylindrical Aluminum Housing
• Nickel Plated Rust Resisting Post Connectors
• Soft Turn On/Off Power Surge
• Automatic On/Off Power Surge
• Accurate 3 Digit Voltage Display
• Bright Changing Status LED
• Notification Safety Sound Alert
• Digital Over Voltage Protection System
• Mounting/Charging Accessories Included
• Specifications:
• Voltage: 16V Maximum / 20V Surge
• Equivalent Series Resistance (ESR): <0.006 Ohm
• Tolerance: +/ 10%
• Charging /Discharging Resister: 1/4W / 1.2K Okm
• Capacitor Type: Electrolytic
• Terminals: Post Connectors
• Dimensions:
• Diameter: 3"
• Length: 10.24"
• Resistor, Mounting Brackets Included!
• Product Condition: Brand New
• Part Number: SRCAP2.0
• 1 Year Manufacturer Warranty
• **Amp Wiring Kit**
• New VM Audio SRSK4B **4 Gauge Amplifier Complete Wiring Kit**
• Maximum of 2000 watts
• Complete amplifier wiring kit with cables, connectors and accessories
• 4 Gauge high current power cables with 315 multi stranded bare copper
• 4 Gauge high current ground cables with 315 multi stranded bare copper
• 18 Gauge remote turn on wire with solid red insulation jacket
• 12 Gauge high density two conductor copper speaker wire with clear red insulation jacket
• E.M.I isolated RCA audio cables with maximum surface contact connection and exclusive VM audio barrel grip
• Nickel plated, high impact resistant 60 AGU fuse holder with exclusive 4 Gauge maximum wire to surface current flow directivity
• 4 Gauge nickel plated power/ground solderless ring crimp terminals
• 4 Gauge nickel plated power/ground solderless spade crimp terminals
• Quick connect nickel plated crimp speaker wire connector
• Element protection power cable loom jacket
• High quality insulated solderless crimp butt terminals
• Durable high strength nylon tie wraps
• Kit includes:
• 16 Ft blue 4 gauge power wire
• 3 ft silver 4 gauge ground wire
• 15 ft high performance RCA wire
• 4 Gauge In line AGU fuseholder
• 60 Amp AGU fuse
• 15 ft 18 Gauge Remote wire
• 20 ft 12 gauge Speaker wire
• 20) 6" wire ties
• 2) spade connectors
• 2) ring connectors
• 3) screws
• 3) butt connectors
• 4) fasten connectors
• 5) spade connectors
• Cable firewall black rubber gromments
• Product Condition: Brand New
• Part Number: SRSK4B
• 1 Year Manufacturer Warranty

Shipping Information

VMInnovations is proud to offer fast, free shipping every day. Items are typically delivered between 1-3 days.

Most orders placed before 2:00 PM CST ship the same day.

read more about Shipping Policies