2) New Kenwood KFC-W112S 12" 1600W Car Subwoofers + KAC-5206 400W Amp + Amp Kit

The **Kenwood KFC-W112S** 12" car subwoofers feature a MAX power of 800 watts (1600W per pair) and a RMS power of 200 watts (400W per pair). Other features include the injection polypropylene cone woofer and the high-roll urethane surround.

The **Kenwood KAC-5206** 2-channel class AB car audio amplifier features a MAX power of 400 watts and a RMS power of 60 watts at 4 ohms 2-channel, 75 watts at 2 ohms 2-channel or bridged 150 watts at 1-channel. Other features include the power MOSFET switching power supply, cast aluminum heat sink design and is CEA-2006 compliant.

- 2) 12" Subwoofers

- 2-Channel Amplifier

- 8 Gauge Amplifier Install Kit

1 Year VMInnovations Warranty

• **Subwoofers:**
• Kenwood 12" Single 8 ohms Subwoofer
• Power Handling:
• Peak: 800 watts (1600W per pair)
• RMS: 200 watts (400W per pair)
• Impedance: 8 ohms
• Injection molded polypropylene cone
• High-roll urethane surround
• Silver plated terminals
• Steel speaker basket
• 2" Voice coil
• Ferrit magnet
• Frequency response: 28-800 Hz
• Sensitivity: 90 dB
• Condition: Brand New!
• Part Number: **KFC-W112S**
• 1 Year VMInnovations Warranty
• **Amplifier:**
• New Kenwood KAC-5206 400 Watt 2-Channel Class AB Car Audio Amplifier Amp Stereo
• Rated Power:
• 60Watts RMS x 2-ch (4 Ohms)
• 75Watts RMS x 2-ch (2 Ohms)
• 150Watts RMS x 1-ch (Bridged 4 Ohms)
• MAX POWER:
• 400Watts
• Amplifier Type: Class AB
• 2 Ohms Load Capability
• Speaker Level Input
• Signal Sensing Turn-on
• Power MOS-FET Switching Power Supply
• Cast Aluminum Heat Sink Design
• Triangle Indicator
• Signal to Noise Ratio: 95dB (Reference: Rated Power into 4Ohms at 14.4V)
• Frequency Response: 5Hz-50kHz (+0dB, -3dB)
• Input Impedance: 10k ohm
• Speaker Impedance: 4O (2O to 8O allowable)
• Bridged connection 4O to 8O allowable
• Low-Pass Filter: Built in Low-Pass Filter (80Hz, -18dB/oct)
• RCA Input Sensitivity: 0.2[V]
• 5.0 [V]
• Speaker Level Input Sensitivity: 4.0[V]
• 12.0 [V]
• Battery & Ground: Screw Type Terminal Block (Ni) (M4)
• Speaker Output: Screw Type Terminal Block (Ni) (M4)
• Line In: RCA (Ni)
• Speaker Input: JST Connector
• Operating Voltage: 14.4V(11-16V allowable) [V]
• Current Consumption: 13 [A]
• CEA-2006 Compliant
• Dimensions(WxHxD): 8-7/8 inch x 2-3/16 inch x 7-1/16 inch
• Condition: Brand New!
• Part Number: **KAC-5206**
• 1 Year VMInnovations Warranty
• **Wiring Kit**
• VM Audio SRPK8R 8 Gauge Car Amplifier Amp Installation Wiring Complete Kit+RCA
• Type: 2 Channel
• Amplifiers Supported: Single Amplifier
• Power/Ground Wire Size: 8 Gauge
• Strand Count: 294
• Power Wire Length: 17Ft
• Ground Wire Length: 3Ft
• Speaker Wire Size: NA
• Speaker Wire Length:: NA
• Remote Wire Size: 18 Gauge
• Remote Wire Length: : 17Ft
• RCA Cable Length: 17Ft
• Fuse Holder: AGU
• Fuse Size: 50A
• Wire Ties: 10
• Spade Connectors: 2
• Ring Connectors: 2
• Ring Spade Terminals: NA
• Butt Connectors: 2
• Split Loom Tubing: Yes
• Screws: NA
• Fasten Connectors: NA

Shipping Information

VMInnovations is proud to offer fast, free shipping every day. Items are typically delivered between 1-3 days.

Most orders placed before 2:00 PM CST ship the same day.

read more about Shipping Policies