2) VM Audio Elux 10" Car Subwoofers + Boss 3000W Mono D Amp + Wiring Kit + Cap

The VM Audio Elux Series 10" competition subwoofer was designed for those with a passion for pure and unmuddled bass. We know you're going to push your audio equipment to its maximum potential and our expert audio engineering team designed our Elux series subwoofers to keep up.

The Boss AR3000D Armor series, monoblock, class D car amplifier features a MAX power handling of 3000 watts and a RMS power of 1200 watts at 4 ohm. The class D Output transistors rapidly switch completely “on” and “off” at least twice during each cycle. These amplifiers boast higher efficiency, produce less heat and draw less current than Class A/B designs. Best used for Subwoofers.

VM Audio’s Shaker Series Capacitors provide state of the art backup power and regulation for your amplifier. What makes the Shaker Capacitor one of the most innovative on the market is the Hybrid Power Flow technology and Charging Stabilizer feature. Hybrid Power Flow digitally regulates the power current for precise power control so that you won’t miss a beat when extra energy is required from the power reserve. All the while the Charging Stabilizer maintains and regulates the high current to the amplifier. The high performance copper wires are wrapped in the durable and flexible SurfaceFlex wire jacket for effective cable routing. The CRB fuse holder has been specially plated with nickel for corrosion protection against the elements. Last but not least, distortion and external noise are reduced to a minimum with the Strand Interaction Conductor.

• **Elux Series 10'' 2100W Competition Subwoofer**
• RMS Power: 1050 Watts
• Peak Power: 2100 Watts
• Dual Voice Coil Low Frequency Subwoofers
• High Excursion Linear Mechanical Suspension System
• Tough, Weather Resistant Wide Rubber Surround
• Large, Linear Flex Damping Controlled Poly Cotton Spider
• Vibraducer Feather Light IMPP Mass Cone
• High Strength, Custom Tooled Proprietary Stamp Steel Basket
• High Impact Resistant One Piece Magnet Cover
• Aerodynamic, Direct Voice Coil Surface Cooling System
• Extended, Thermal Cooling Vented Pole Piece Motor Structure
• Heavy Duty Nickel Plated Wire Connection Push Terminals
• Spider Woven High Conducting Silver Tinsel Leads
• Mounting Guiding Tall Beveled Color Matching Trim Ring
• Sealed or Ported Enclosure Performance
• TECHNICAL SPECIFICATIONS
• Size:
• 10"
• Nominal Impedance:
• Dual 4 Ohm
• RMS Power:
• 1050W
• Peak Power Handling:
• 2100W
• Voice Coil Diameter:
• 2.5" (60.6mm)
• Magnet Weight:
• 38.7oz * 2
• Frequency Response:
• 28Hz 390Hz
• Clone Material:
• Polypropylene
• Surround Material:
• Butyl Rubber
• Mounting Diameter:
• 9.02" (229mm)
• Mounting Height:
• 4.96" (126mm)
• Warranty: 1 Year
• **New *Boss AR3000D* Armor Series 3000 Watt Mono D Car Amplifier**
• RMS Power:
• 1200 Watt x 1 Channel @ 4 Ohm
• Max Power:
• 2200 Watt x 1 Channel @ 2 Ohm
• 3000 Watt x 1 Channel @ 1 Ohm
• Mosfet Power Supply
• Subsonic Filter
• Phase Control
• THD: 0.01%
• Signal to Noise Ratio: >105dB
• Dimensions: 6.5" W x 2.625" H x 13 5/16"L
• Product Condition: Brand New
• Item Weight: 7.25 lbs.
• Part Number: **AR3000D**
• Warranty: 2 years (1 Year Manufacturer + 1 Year VMInnovations Warranty)
• New VM Audio SRPK4R 4 Gauge Amplifier Complete Wiring Kit
• 2000 watts maximum
• Complete amplifier wiring kit with cables, connectors and accessories
• 4 Gauge high current power cables with 315 multi stranded bare copper
• 4 Gauge high current ground cables with 315 multi stranded bare copper
• 18 Gauge remote turn on wire with solid red insulation jacket
• 12 Gauge high density two conductor copper speaker wire with clear red insulation jacket
• E.M.I isolated RCA audio cables with maximum surface contact connection and exclusive VM audio barrel grip
• Nickel plated, high impact resistant 60 AGU fuse holder with exclusive 4 Gauge maximum wire to surface current flow directivity
• 4 Gauge nickel plated power/ground solder less ring crimp terminals
• 4 Gauge nickel plated power/ground solder less spade crimp terminals
• Quick connect nickel plated crimp speaker wire connector
• Element protection power cable loom jacket
• High quality insulated solder less crimp butt terminals
• Durable high strength nylon tie wraps
• Kit includes:
• 16 Ft red 4 gauge power wire
• 3 ft black 4 gauge ground wire
• 15 ft high performance RCA wire
• 4 Gauge In line AGU fuse holder
• 60 Amp AGU fuse
• 15 ft 18 Gauge Remote wire
• 20 ft 12 gauge Speaker wire
• 20) 6" wire ties
• Split Loom Tubing
• 2) spade connectors
• 2) ring connectors
• 3) screws
• 3) butt connectors
• 4) fasten connectors
• 5) spade connectors
• Cable firewall black rubber grommets
• Product Condition: Brand New
• Part Number: SRPK4R
• 1 Year Manufacturer Warranty
• **New VM Audio SRCAP3.0 3 Farad Car Hybrid Digital Capacitor**
• 3 Farad High Energy Electrolytic Capacitor
• 3000W Stabilizing Amplifier Flow Capacity
• High Strength Cylindrical Aluminum Housing
• Nickel Plated Rust Resisting Post Connectors
• Soft Turn On/Off Power Surge
• Automatic On/Off Power Surge
• Accurate 3 Digit Voltage Display
• Bright Changing Status LED
• Notification Safety Sound Alert
• Digital Over Voltage Protection System
• Mounting/Charging Accessories Included
• Specifications:
• Voltage: 16V Maximum / 20V Surge
• Equivalent Series Resistance (ESR): <0.006 Ohm
• Tolerance: +/ 10%
• Charging /Discharging Resister: 1/4W / 1.2K Okm
• Capacitor Type: Electrolytic
• Terminals: Post Connectors
• Dimensions:
• Diameter: 3"
• Length: 10.24"
• Resistor, Mounting Brackets Included!
• Product Condition: Brand New
• Part Number: SRCAP3.0
• 1 Year Manufacturer Warranty

Shipping Information

VMInnovations is proud to offer fast, free shipping every day. Items are typically delivered between 1-3 days.

Most orders placed before 2:00 PM CST ship the same day.

read more about Shipping Policies