Intex Boat Mount Kit & Inflatable Raft Boat Set With Pump And Oars (2 Pack)

The Intex Motor Mount Kit fits all inflatable Intex boats with mount fittings on the rear of the boat. The Motor Mount Kit attaches in minutes and expands the capability of your inflatable boat. Effortlessly cruise across the water with motors up to 3.5 horsepower. When you're finished, the Intex Motor Mount Kit detaches and disables in minutes for easy storage and transportation.

In life you must do whatever floats your boat, so grab a couple of friends and hit the water. This Intex Challenger 3 is constructed of rugged, Super-Tough PVC and has inflatable I-beam floors for comfort and rigidity. It has 3 air chambers, 2 quick-fill and fast-deflate Boston valves with an included high-output hand pump.

The water is calling and you must go, but be sure to take this Intex Challenger 3 Inflatable Boat Set With Pump And Oars and 2 fellow paddlers along with you.

• Intex Composite Boat Motor Mount Kit for Inflatable Boats
• Attaches in minutes to any Intex inflatable boat with rear mount fittings such as:
• Challenger 3
• Seahawk 2, 3 and 4
• Seahawk II
• Excursion 3, 4, and 5
• Mariner 3 and 4
• Heavy duty composite mount with aluminum supports
• Fits up to a 3.5 horsepower motor (not included)
• Gas or electric outboard motor
• Detaches quickly and mount kit disassembles for easy storage and transportation
• Weight: 5 pounds
• Warranty: 90 Day Intex warranty against product defects
• Part number: 68624EP
• Manufacturer warranty: 90-day warranty
• Quantity: 2
• Intex Challenger 3 Inflatable Boat Set With Pump And Oars
• Sporty, fun, and durable, this Intex Challenger 3 is ready to get out there and explore the tides
• Room for 3 paddlers
• 3 air chambers including inner auxiliary chamber inside main hull for extra buoyancy
• 2, quick-fill, fast-deflate Boston valves
• Rugged vinyl construction with SUPERTOUGH PVC durable plastic
• 2 inflatable seat cushions
• Grab handles on bow and all-around grab line
• Inflatable I-beam floor for comfort and rigidity
• Motor mount fittings on the rear of the boat
• 48-inch aluminum oars make rowing easy
• Welded-on oar locks and oar holders built right into the Challenger 3
• High-output hand pump for fast fill-ups (Intex model # 68614E)
• Includes repair patch kit
• U.S. Coast Guard I.D. and TUV approved
• Weight Capacity: 560 pounds
• Warranty: 30 days
• Dimensions: 116 x 54 x 17 inches
• Weight: 29 pounds
• Part number: 68370EP
• Manufacturer warranty: 30-day warranty
• Quantity: 2

Shipping Information

VMInnovations is proud to offer fast, free shipping every day. Items are typically delivered between 1-3 days.

Most orders placed before 2:00 PM CST ship the same day.

read more about Shipping Policies