If you're looking to beat out your friends, then you need to experience powerful, immersive car audio with the Dual Loaded 1200-Watt Car Subwoofer Enclosure Audio with Sub Box, Mono Block, and 8-Gauge Amplifier Complete Wiring Installation Kit.

This MTX terminator series subwoofer system includes 2 subs, a sub enclosure, and a car amp. With 1200 max power, it gives off super deep bass sounds while keeping maximum sound quality. All you need to complete this subwoofer package is an amp wiring kit. The 8-gauge amplifier installation kit has everything you need to install the amplifier in your car. The amp kit features a 20 foot 8 gauge red power cable, premium quality fuse holder, 3 feet of 8 gauge black ground cable, 16 feet of 18-gauge blue turn-on wire, a 20-foot high-performance RCA interconnect, 30 feet of speaker wire, 20, 4-inch wire ties, 3, rubber grommets, a Number 10 ring terminal, a 5/16 inch ring terminal, and a 1/4 inch ring terminal.

Get more performance with your car audio and get it done yourself. Feel the deep bass and crisp sound as you hit the road, transforming your drive into a true auditory adventure with the Dual Loaded 1200-Watt Car Subwoofer Enclosure Audio from MTX.

• **Subwoofer:**
• MTX TNP212D2 12" 1200 WATT DUAL Bass Package System
• Box Content:
• 2) MTX Subwoofers
• MTX Subwoofer Box
• MTX Terminator TNA251 Amp
• Subwoofer Enclosure:
• Dual 12" Loaded Subwoofer Enclosure
• 2) 12" Terminator Series Subwoofers
• 1200 Watt MAX PAIR
• 600 Watt RMS PAIR
• 2" Aluminum Voice Coils
• Single 4 Ohm Voice Coils per Sub ( Pre Wired Down to 2 Ohm Load)
• MTX Logo on Dustcap
• Rubber Surround
• Polypropylene Cone
• 48 Oz Magnet (Each)
• Frequency Response : 37 150Hz
• 5/8" MDF Solid Construction
• Aviation Grade Black Carpet
• "Terminator" Logo In the Carpet
• Dimensions: 13.875"H x 29.625"W x 13.875" D
• Amplifier:
• Terminator Series TNA251 600 WATT MAX MONO D Car Power Amplifier
• 1 Channel x 500 Watt @ 2 Ohm MAX
• 1 Channel x 250 Watt @ 2 Ohm RMS
• 1 Channel x 150 Watt @ 4 Ohms RMS
• Adaptive D Channel MOSFET Design
• Variable Low Pass 12dB/Octave from 40Hz 400Hz
• Variable High Pass 12dB/Octave from 40Hz 400Hz
• Low Pass Crossover
• Bass Boost
• THD+N (1 Watt) 1%
• Fuse Rating: 30A x 2
• Maximum Input Signal: 6V
• Maximum Sensetivity: 100mV
• Frequency Response: 20Hz 30.000Hz
• Remote Bass Control Included
• CEA 2006 Compliant Amplifier
• 8 Gauge Power/Ground Leads Recommended
• Dimensions: 12 1/4"L x 7 1/8"W x 2 1/4"H
• Product Condition: Brand New
• Part Number: TNP212D2
• 1 Year Manufacturer Warranty
• **Amp Kit:**
• Soundstorm AKS8 Complete 8 Gauge Amplifier Installation Kit
• 20 ft. 8 Gauge Red power cable
• Competition high quality fuse holder
• 1/4" Gold plated ring terminal
• 3 ft. 8 Gauge Black ground cable
• #10 Gold plated ring terminal
• 16 ft. 18 Gauge Blue turn on wire
• 20 ft. High performance RCA interconnect
• (3) Rubber grommets
• 30 ft. Speaker wire
• 5/16" Gold plated ring terminal
• 6 ft. Split loom tubing
• (20) 4" Wire ties
• Product Condition: Brand New
• Part Number: AKS8
• 1 Year Manufacturer Warranty

Shipping Information

VMInnovations is proud to offer fast, free shipping every day. Items are typically delivered between 1-3 days.

Most orders placed before 2:00 PM CST ship the same day.

Free Shipping Details

• Our free shipping service is standard ground shipping with FedEx, USPS, or a regional carrier.
• Items are usually delivered in 1-3 days, but some may take up to 5 days.
• Some orders may require a signature before delivery.
• At this time, we only offer free shipping inside the 48 continental United States.
• Free shipping is not available for APO/FPO.
• Some items can be shipped to Alaska, Hawaii, or Puerto Rico. Please note free shipping does not apply to these locations. You will need to select the AK/HI/PR shipping in your cart.
• We are currently unable to ship items internationally.

Freight Shipping Information (LTL)

Some items are too large to be shipped with a regional carrier, FedEx, or USPS, and we ship these items with our freight carriers.

Please read the information below so you fully understand the delivery process and requirements.

Required Actions

We will need your phone number for the delivery. The carrier will need to call you in order to set up a delivery time. Please make sure the number you provide during checkout is the best one to reach you. If paying with PayPal, please make sure the number on your account is accurate.

You'll need to inspect your package upon arrival before you sign. If your order arrives damaged, you should sign "DAMAGED" on the delivery receipt. If the item is damaged to the point that it is not usable, you can refuse the item.

Please notify and, if possible, send photos of any damage to vminnovations_help@email.spreetail.com, along with your order number. A member of our Customer Experience team will reach out to you with further instructions.

Delivery Information

At this time, we do not offer "in-home" deliveries. Your shipment must be delivered to the curbside and will require a signature. Please be sure you are able to move the item after it arrives, as the carrier will not be able to assist.

We do our best to ship orders as fast as we can. If you need to cancel your order, please let us know as soon as possible by calling our Customer Experience team at 866-639-9320. Please note that if we are unable to cancel your order before it ships, you will be responsible for the shipping charges.

If the item is returned from the freight company for any reason other than damage, additional shipping or storage fees may apply. Reasons may include invalid or incorrect address information, and incorrect phone number or contact information, or failing to schedule or missing an already scheduled delivery appointment.

If the item is delivered and a return is requested, the freight shipping fees will be deducted from the final refund amount.