Rockford Fosgate P1-2X12 12" 1000W Dual Subwoofer + Box + 2000W Amp + Amp Kit

The **Rockford Fosgate P1 2X12** is a dual P1 12” vented enclosure with 500 Watts RMS power and 1000 watts of MAX power handling wired to a 2 Ohm load. The enclosure is constructed with 5/8” MDF, covered in high density carpet, and features quick release compression terminals.

The most advanced and innovative technologies with meticulous design and engineering give the VM Audio Elux Fidelity Class A/B Power Amplifier a level of sophistication like no other. A/B Topology ensures crystal clear sound, separating positive and negative signals with incredibly accurate precision. Our V MOSFET engine provides high powered, dynamic headroom with little heat or distortion. Fast acting DC DC power conversion creates stable DC voltages in a more efficient manner. The Self Guard Five Way Protection guards against overheating, short circuiting, over current and under voltage.

Our Elux Series Fidelity Class A/B Power Amplifiers not only boost the level of sound decibels, but more importantly, boost the quality of listening experience. Experience the difference in power and clarity in your music with VM Audio’s Elux Series Fidelity Class A/B Power Amplifiers.

8 Gauge Complete Amplifier Installation Kit

• **Subwoofer:**
• New Rockford Fosgate P1 2X12 12" 1000 Watt Dual Loaded Subwoofer Sub Enclosure
• Power Handling:
• Peak: 1000 watts total
• RMS: 500 watts total
• Impedance: 2 ohm (Internally wired to create a 2 Ohm amplifier load)
• High modulus Kevlar reinforced paper cone and dust cap provides durability
• High density NBR half roll surround for enhanced excursion
• Speaker Connector: Up to 10 AWG compression terminals
• Tear and fatigue resistant poly cotton spider
• High temperature 2" 4 layer voice coil with spun laced Nomex insulating reinforcement collar
• Optimized motor magnetics with extended pole piece and bumped backplate
• Fatigue resistant and reduced strain stitched on flexible lead wire design
• Multi point high temperature/high strength neck joint bonding
• High quality 16 gauge compound bend frame geometry
• Semi flexible PVC removable protective motor cover
• Proprietary spider venting/cooling
• Decorative ABS trim ring
• Enclosure Material: 5/8" MDF (Medium Density Fiberboard)
• Frequency Response: 25 250 Hz
• Sensitivity: 86 dB
• Dimensions: 15.125" x 33.875" x 15.75"
• CEA 2031 Compliant
• Condition: Brand New!
• Item Weight: 69.85 lbs.
• Part Number: **P1 2X12**
• 1 Year Manufacturer Warranty
• **Amplifier:**
• **VM Audio EXA2000.1 Class A/B Mono Block 2000W Amplifier**
• Power Amplifier
• Type: Mosfet
• Channels: 1
• Total Power 2000W
• RMS Power @ 4 Ohm: 1000Wx1
• Peak Power @ 2 Ohm: 2000Wx1
• Peak Power @ 4 Ohm Bridged: NA
• Minimum Impedance Unbridged: 2
• Minimum Impedance Bridged: NA
• Frequency Response: 10Hz 250kHz
• Single to Noise Ratio: 93dB
• Circuit Type: A/B
• Protection Circuit: 5 Way
• Low/Highpass Crossover: 50Hz 250Hz
• Preamp Outputs: 1 Pair
• Bass Boost: 0dB 12db
• Bass/Gain Remote: Yes
• Power Indicator: Yes
• Terminals: Nickel Plated
• Power /Ground Connection: 4 Gauge
• Input Voltage: 14.4V
• Fuse: 2x30A
• Dimensions: 13.54"L x 9.65" W x 2.17" H
• Warranty: 1 Year
• **Amp Kit:**
• Soundstorm AKS8 Complete 8 Gauge Amplifier Installation Kit
• 20 ft. 8 Gauge Red power cable
• Competition high quality fuse holder
• 1/4" Gold plated ring terminal
• 3 ft. 8 Gauge Black ground cable
• #10 Gold plated ring terminal
• 16 ft. 18 Gauge Blue turn on wire
• 20 ft. High performance RCA interconnect
• (3) Rubber grommets
• 30 ft. Speaker wire
• 5/16" Gold plated ring terminal
• 6 ft. Split loom tubing
• (20) 4" Wire ties
• Product Condition: Brand New
• Part Number: AKS8
• 1 Year Manufacturer Warranty

Shipping Information

VMInnovations is proud to offer fast, free shipping every day. Items are typically delivered between 1-3 days.

Most orders placed before 2:00 PM CST ship the same day.

read more about Shipping Policies