Rockford Fosgate R1-2X10 10" 800W Dual Subwoofer + Sub Box + 2800W Amp + Amp Kit

The **Rockford Fosgate R1 2X10** is a loaded enclosure containing dual 10” subwoofers constructed with durable MDF, high density carpet, and features quick release terminals to promptly remove or replace the enclosure in your ride. Power handling includes a RMS power of 400 watts and a MAX power of 800 watts.

This VM Audio Amplifier offers an RMS power rating of 1400 watts x 1 channel at 4 Ohm and a peak power of 2800 watts x 1 channel at 2 Ohm. Its extremely low noise and distortion means this amplifier runs quietly and efficiently, and it offers a dedicated soft turn on circuit.

The Fidelity Class A/B Circuitry delivers precise half signal transitions with low heat generation. Signals are reproduced separately and joined together to complete the full signal. Measuring 14.54"L x 9.65" W x 2.17", this amplifier can fit in slim spaces.

**New VM Audio SRPK4R 4 Gauge Amplifier Complete Wiring Kit**

• **Subwoofers:**
• New Rockford Fosgate R1 2X10 10" 800 Watts Dual Loaded Subwoofer Sub Enclosure
• Power Handling:
• Peak: 800 watts
• RMS: 400 watts
• Impedance: 2 Ohm
• Integrated Trim Ring
• Stamped Steel Basket
• 12 AWG Compression Terminals
• Single Voice Coil
• Optimized for Sealed & Vented Enclosures
• High Current Binding Posts
• Constructed with 5/8” MDF
• Covered with High Density Carpet
• Dimensions: H 12.2" x W 30.12" x D 12.11"
• CEA 2031 Compliant
• Condition: Brand New!
• Item Weight: 36.85 lbs.
• Part Number: **R1 2X10**
• 1 Year Manufacturer Warranty
• **Amplifier:**
• **VM Audio EXA2800.1 2800W Mono Amplifier**
• Type:Mosfet
• Channels: 1
• Total Power 2800W
• RMS Power @ 4 Ohm: 1400Wx1
• Peak Power @ 2 Ohm: 2800Wx1
• Peak Power @ 4 Ohm Bridged: NA
• Minimum Impedance Unbridged: 2
• Minimum Impedance Bridged: NA
• Frequency Response: 10Hz 250kHz
• Single to Noise Ratio: 93dB
• Circuit Type: A/B
• Protection Circuit: 5 Way
• Low/Highpass Crossover: 50Hz 250Hz
• Preamp Outputs: 1 Pair
• Bass Boost: 0dB 12db
• Bass/Gain Remote: Yes
• Power Indicator: Yes
• Terminals:Nickel Plated
• Power /Ground Connection:4 Gauge
• Input Voltage: 14.4V
• Fuse: 2x40A
• Dimensions: 14.54"L x 9.65" W x 2.17" H
• Warranty: 1 Year
• **Amp Kit:**
• New VM Audio SRPK4R **4 Gauge Amplifier Complete Wiring Kit**
• Maximum of 2000 watts
• Complete amplifier wiring kit with cables, connectors and accessories
• 4 Gauge high current power cables with 315 multi stranded bare copper
• 4 Gauge high current ground cables with 315 multi stranded bare copper
• 18 Gauge remote turn on wire with solid red insulation jacket
• 12 Gauge high density two conductor copper speaker wire with clear red insulation jacket
• E.M.I isolated RCA audio cables with maximum surface contact connection and exclusive VM audio barrel grip
• Nickel plated, high impact resistant 60 AGU fuse holder with exclusive 4 Gauge maximum wire to surface current flow directivity
• 4 Gauge nickel plated power/ground solder less ring crimp terminals
• 4 Gauge nickel plated power/ground solder less spade crimp terminals
• Quick connect nickel plated crimp speaker wire connector
• Element protection power cable loom jacket
• High quality insulated solder less crimp butt terminals
• Durable high strength nylon tie wraps
• Kit includes:
• 16 Ft red 4 gauge power wire
• 3 ft black 4 gauge ground wire
• 15 ft high performance RCA wire
• 4 Gauge In line AGU fuse holder
• 60 Amp AGU fuse
• 15 ft 18 Gauge Remote wire
• 20 ft 12 gauge Speaker wire
• 20) 6" wire ties
• 2) spade connectors
• 2) ring connectors
• 3) screws
• 3) butt connectors
• 4) fasten connectors
• 5) spade connectors
• Cable firewall black rubber grommets
• Product Condition: Brand New
• Part Number: SRPK4R
• 1 Year Manufacturer Warranty

Shipping Information

VMInnovations is proud to offer fast, free shipping every day. Items are typically delivered between 1-3 days.

Most orders placed before 2:00 PM CST ship the same day.

read more about Shipping Policies