Get more performance out of your entire car audio system by choosing the right amp, the Crunch 1000 Watt 2 Channel Powerzone Series Class AB Car Amplifier. This amplifier also includes a Soundstorm 8 Gauge Wiring Kit.

Unparalleled in quality, the Crunch 1000 Watt 2 Channel Powerzone Series is a low noise pre amplifier with low level RCA inputs and outputs. It features flexible installation, allowing the amp to run in 2 channel or bridged mono mode. With rugged MOSFET pulse width modulation power supply, fully adjustable crossovers, and bass boost, this amplifier will always deliver the quality you need.

The wiring installation kit has everything you need to install your amplifier easily in your car. It features a 20 foot, 8 gauge red power cable, a high quality fuse holder, 3 feet of 8 gauge black ground cable, 16 feet of 18 gauge blue turn on wire, a 20 foot high performance RCA interconnect, 30 feet of speaker wire, 6 feet of split loom tubing, (20) 4 inch wire ties, (3) rubber grommets, a #10 ring terminal, a 0.31 inch ring terminal, and a 0.25 inch ring terminal.

Take your car audio to the next level with the Crunch 1000 Watt 2 Channel Powerzone Series Class AB Car Amplifier and included wiring kit.

• Crunch 1000W 2 Channel Powerzone Series Class AB Car Amplifier
• Low noise pre amplifier
• Maximum low voltage signal from the source unit comes into the amplifier circuit with minimal distortion
• Low Level RCA Inputs and Outputs
• Highest sound quality connection
• Flexible installation allows this amplifier to run in 2 channel or bridged mono mode
• Versa cross electronic crossover
• Fully adjustable 24 dB crossovers
• Designed to be high sound quality with minimal distortion
• Maximum heat dissipation which minimizes distortion
• Rugged MOSFET pulse width modulation power supply
• Specifications:
• Class A/B
• Variable voltage: 0.2 5 volts
• Signal to noise: > 90 dB
• Frequency response: 10Hz 45KHz
• Crossover type: Electronic switch FULL / LPF / HPF
• Bass boost: 0 09 dB
• Power: 2 x 250 watts at 4 ohms, 2 x 500 watts at 2 ohms, 1 x 1000 watts at 4 ohms bridged
• Total channels: 2
• Audio inputs: Unbalanced inputes (RCA)
• Audio outputs: Line output (RCA)
• Dimensions: 8 x 8 x 8 inches
• Weight: 6 pounds
• Part Number: PZX1000.2
• Soundstorm Complete 8 Gauge Amplifier Installation Kit
• 20 feet of 8 gauge red power cable
• Competition high quality fuse holder
• 0.25 inch gold plated ring terminal
• 3 feet of 8 gauge black ground cable
• #10 Gold plated ring terminal
• 16 feet of 18 gauge blue turn on wire
• 20 feet of high performance RCA interconnect
• (3) rubber grommets
• 30 feet of speaker wire
• 0.31 inch gold plated ring terminal
• 6 feet of split loom tubing
• (20) 4 inch wire ties
• Part Number: AKS8
• Manufacturer warranty: 1-year warranty

Shipping Information

VMInnovations is proud to offer fast, free shipping every day. Items are typically delivered between 1-3 days.

Most orders placed before 2:00 PM CST ship the same day.

Free Shipping Details

• Our free shipping service is standard ground shipping with FedEx, USPS, or a regional carrier.
• Items are usually delivered in 1-3 days, but some may take up to 5 days.
• Some orders may require a signature before delivery.
• At this time, we only offer free shipping inside the 48 continental United States.
• Free shipping is not available for APO/FPO.
• Some items can be shipped to Alaska, Hawaii, or Puerto Rico. Please note free shipping does not apply to these locations. You will need to select the AK/HI/PR shipping in your cart.
• We are currently unable to ship items internationally.

Freight Shipping Information (LTL)

Some items are too large to be shipped with a regional carrier, FedEx, or USPS, and we ship these items with our freight carriers.

Please read the information below so you fully understand the delivery process and requirements.

Required Actions

We will need your phone number for the delivery. The carrier will need to call you in order to set up a delivery time. Please make sure the number you provide during checkout is the best one to reach you. If paying with PayPal, please make sure the number on your account is accurate.

You'll need to inspect your package upon arrival before you sign. If your order arrives damaged, you should sign "DAMAGED" on the delivery receipt. If the item is damaged to the point that it is not usable, you can refuse the item.

Please notify and, if possible, send photos of any damage to vminnovations_help@email.spreetail.com, along with your order number. A member of our Customer Experience team will reach out to you with further instructions.

Delivery Information

At this time, we do not offer "in-home" deliveries. Your shipment must be delivered to the curbside and will require a signature. Please be sure you are able to move the item after it arrives, as the carrier will not be able to assist.

We do our best to ship orders as fast as we can. If you need to cancel your order, please let us know as soon as possible by calling our Customer Experience team at 866-639-9320. Please note that if we are unable to cancel your order before it ships, you will be responsible for the shipping charges.

If the item is returned from the freight company for any reason other than damage, additional shipping or storage fees may apply. Reasons may include invalid or incorrect address information, and incorrect phone number or contact information, or failing to schedule or missing an already scheduled delivery appointment.

If the item is delivered and a return is requested, the freight shipping fees will be deducted from the final refund amount.