These **Rockford Fosgate P2D4 12** Subwoofers offer "The Punch" you desire with 800 Watts of MAX power per sub (1600 watts per pair) and 400 Watts of RMS power per sub (800 watts per pair). Also featured are Kevlar fiber reinforced paper cones that deliver bass impact you can feel, VAST technology to increase surface cone area up to 25%, a Flex Fit Basket that allows for fine tuning of the subwoofer's mounting position, an Anodized Aluminum Voice Coil Former that provides superior heat dissipation (up to 100° at full power levels), and Stitched Tinsel Leads to increase reliability while reducing fatigue and possible shorting. These subwoofers perform best in standard sealed and vented enclosures and a diamond cut cast aluminum trim ring is included. Receive the "The Punch" you desire with the Rockford Fosgate P2D4 12 Subwoofers!

Read the Owner's Manual [here][1]

View the Specifications [here][2]

[1]: http://www.rockfordfosgate.com/rftech/library/2011/5_Subwoofers/4020118 0_P2Subs MAN_Rev2.pdf

[2]: http://www.rockfordfosgate.com/rftech/library/2011/5_Subwoofers/RFPB_P2D4 12 TS_RevD.pdf

**VM Audio EXA1000.2 Class A/B 1/2 Channel 1000W Power Amplifier**

Although car audio systems have come a long way in recent years, the prices of these quality systems have continued to rise. VM Audio is here to solve that problem with the new VM Audio Elux Fidelity A/B Class Power Amplifier. This amplifier will give you the professional quality boost your music demands without breaking the bank.

This VM Audio Amplifier offers an RMS power rating of 250 watts x 2 channels at 4 Ohm and a peak power of 500 watts x 2 channels at 2 Ohm as well as a peak power of 1000 watts X 1 channel at 4 ohms when bridged. Its extremely low noise and distortion means this amplifier runs quietly and efficiently, and it offers a dedicated soft turn on circuit.

The Fidelity Class A/B Circuitry delivers precise half signal transitions with low heat generation. Signals are reproduced separately and joined together to complete the full signal. Measuring 10"L x 9.65" W x 2.17" H, this amplifier can fit in slim spaces.

**New VM Audio SRSK4B Gauge Amplifier Complete Wiring Kit**

This complete **amplifier wiring kit** comes with all the cables, connectors and accessories you'll need to wire your amp easily. This amplifier wiring kit comes with 4 gauge, high current power cables with 315 multi stranded copper, EMI isolated RCA audio cables with maximum surface contact connect with an exclusive VM Audio barrel grip, a nickel plated high impact resistant 60 AGU fuse holder with exclusive 4 gauge maximum wire to surface current flow directivity and much more.

This **amplifier wiring kit** also comes with all the installation hardware you'll need to have your amp up and running in less time.

• High quality insualted solderless crimp butt terminals
• Element protection power cable loom jacket
• 1 Year Manufacturer Warranty

• TWO BRAND NEW **ROCKFORD FOSGATE P2D4 12** 12" 1600 Watt Car Subwoofers
• 800 Watt MAX per sub (1600 watts per pair)
• 400 Watt RMS per sub (800 watts per pair)
• Dual linear spider with embedded 16 AWG tinsel leads
• Custom 10 AWG nickel plated push terminals
• Extended pole piece and bumped vented backplate
• High temp voice coil with spun laced Nomex® re inforcement collar
• Protective PVC textured magnet cover
• Kevlar fiber reinforced paper cone
• StampCast basket with integrated spider venting
• Diamond cut cast aluminum trim ring
• **Specifications:**
• Size: 12 Inch
• 2.25" (4 Layer) Voice Coil
• Impedance: Dual 4 Ohm
• Magnet Weight (oz): 72.8 oz. (2.06 kg.)
• Speaker Connector: Dual 10 AWG compression
• Fs (Hz): 27.2
• Re (Ohms): 6.40
• Le (mH): 5.5
• Qms: 6.30
• Qes: 0.59
• Qts: 0.54
• Vas (Liters): 81.5
• Sd (cm2): 570
• PL (dB @ 1w/1m): 86
• Xmax (mm): 13.3
• Woofer Displacement (in): 0.170 cu. ft. (4.8 Liters)
• Cutout Diameter (in): 11.22 in. (285 mm)
• Mounting Depth: 6.40 Inches (162 mm)
• CEA 2031 Compliant
• Quantity: 2 Subs
• Weight: 31.2 lbs (shipping weight for both subs)
• Product Condition: BRAND NEW!
• Part Number: **P2D4 12**
• 2 Year VMInnovations Warranty
• ![List item][1]
• [1]: http://www.vminnovations.com/sys/resource.ashx?guid=b2982b8f0b9d4f27a70cab3f58d8f4a0
• **VM Audio EXA1000.2 Class A/B 1/2 Channel 1000W**
• Type: Mosfet
• Channels: 2
• Total Power 1000W
• RMS Power @ 4 Ohm: 250Wx2
• Peak Power @ 2 Ohm: 500Wx2
• Peak Power @ 4 Ohm Bridged: 1000Wx1
• Minimum Impedance Unbridged: 2
• Minimum Impedance Bridged: 4
• Frequency Response: 20Hz 20kHz
• Single to Noise Ratio: 93dB
• Circuit Type: A/B
• Protection Circuit: 5 Way
• Low/Highpass Crossover: 50Hz 250Hz
• Preamp Outputs: 1 Pair
• Bass Boost: 0dB 12db
• Bass/Gain Remote: NA
• Power Indicator: Yes
• Terminals: Nickel Plated
• Power /Ground Connection: 4 Gauge
• Input Voltage: 14.4V
• Fuse: 30A
• Dimensions: 10"L x 9.65" W x 2.17" H
• Warranty: 1 Year
• New VM Audio SRSK4B **4 Gauge Amplifier Complete Wiring Kit**
• Maximum of 2000 watts
• Complete amplifier wiring kit with cables, connectors and accessories
• 4 Gauge high current power cables with 315 multi stranded bare copper
• 4 Gauge high current ground cables with 315 multi stranded bare copper
• 18 Gauge remote turn on wire with solid blue insulation jacket
• 12 Gauge high density two conductor copper speaker wire with clear blue insulation jacket
• E.M.I isolated RCA audio cables with maximum surface contact connection and exclusive VM audio barrel grip
• Nickel plated, high impact resistant 60 AGU fuse holder with exclusive 4 Gauge maximum wire to surface current flow directivity
• 4 Gauge nickel plated power/ground solder less ring crimp terminals
• 4 Gauge nickel plated power/ground solder less spade crimp terminals
• Quick connect nickel plated crimp speaker wire connector
• Element protection power cable loom jacket
• High quality insulated solder less crimp butt terminals
• Durable high strength nylon tie wraps
• Kit includes:
• 16 Ft blue 4 gauge power wire
• 3 ft black 4 gauge ground wire
• 15 ft high performance RCA wire
• 4 Gauge In line AGU fuse holder
• 60 Amp AGU fuse
• 15 ft 18 Gauge Remote wire
• 20 ft 12 gauge Speaker wire
• 20) 6" wire ties
• 2) spade connectors
• 2) ring connectors
• 3) screws
• 3) butt connectors
• 4) fasten connectors
• 5) spade connectors
• Cable firewall black rubber grommets
• Product Condition: Brand New
• Part Number: SRPK4R
• 1 Year Manufacturer Warranty

Shipping Information

VMInnovations is proud to offer fast, free shipping every day. Items are typically delivered between 1-3 days.

Most orders placed before 2:00 PM CST ship the same day.

Free Shipping Details

• Our free shipping service is standard ground shipping with FedEx, USPS, or a regional carrier.
• Items are usually delivered in 1-3 days, but some may take up to 5 days.
• Some orders may require a signature before delivery.
• At this time, we only offer free shipping inside the 48 continental United States.
• Free shipping is not available for APO/FPO.
• Some items can be shipped to Alaska, Hawaii, or Puerto Rico. Please note free shipping does not apply to these locations. You will need to select the AK/HI/PR shipping in your cart.
• We are currently unable to ship items internationally.

Freight Shipping Information (LTL)

Some items are too large to be shipped with a regional carrier, FedEx, or USPS, and we ship these items with our freight carriers.

Please read the information below so you fully understand the delivery process and requirements.

Required Actions

We will need your phone number for the delivery. The carrier will need to call you in order to set up a delivery time. Please make sure the number you provide during checkout is the best one to reach you. If paying with PayPal, please make sure the number on your account is accurate.

You'll need to inspect your package upon arrival before you sign. If your order arrives damaged, you should sign "DAMAGED" on the delivery receipt. If the item is damaged to the point that it is not usable, you can refuse the item.

Please notify and, if possible, send photos of any damage to vminnovations_help@email.spreetail.com, along with your order number. A member of our Customer Experience team will reach out to you with further instructions.

Delivery Information

At this time, we do not offer "in-home" deliveries. Your shipment must be delivered to the curbside and will require a signature. Please be sure you are able to move the item after it arrives, as the carrier will not be able to assist.

We do our best to ship orders as fast as we can. If you need to cancel your order, please let us know as soon as possible by calling our Customer Experience team at 866-639-9320. Please note that if we are unable to cancel your order before it ships, you will be responsible for the shipping charges.

If the item is returned from the freight company for any reason other than damage, additional shipping or storage fees may apply. Reasons may include invalid or incorrect address information, and incorrect phone number or contact information, or failing to schedule or missing an already scheduled delivery appointment.

If the item is delivered and a return is requested, the freight shipping fees will be deducted from the final refund amount.