This refurbished Polk Audio 2 Channel Car Amplifier is an incredibly efficient and sleek Class D mobile audio amp. The toroidal transformers keep the design to be less than 2 inches tall and make it run cleanly and efficiently.

This amp can bridge a left and right terminal into a single full range channel with a huge power output. Try the 2 full range channels or a bridged subwoofer channel hookup modes.

Your amp won't be shocked or shorted. It comes with thermal, DC offset, reverse DC voltage, and short circuit protection. It's constructed with stainless steel hardware, which won't corrode in humid conditions.

Get an amp that's sleek and compact but has plenty of power and crossover features, the PA D2000.2.

• Super efficient Class D bridgeable 2 channel mobile audio amplifier
• Most common hookups 2 full range channels or a bridged subwoofer channel
• The L /R+ channels increase the output power from 125 watts to 500 watts per channel
• Minimum impedance not bridged: 2 ohms
• Minimum impedance bridged: 4 ohms
• Maximum sensitivity: 200 mV 6V dB
• Effective damping factor: > 100
• Distortion at rated power: < 0.1%
• 12V and ground cable gauge: 4 AWG
• RMS power at 14.4V watts per channel NOT bridged @ 1 kHz 4 ohms: 125 watts
• RMS power at 14.4V watts per channel NOT bridged @ 1 kHz 2 ohms: 250 watts
• RMS power at 14.4V watts per channel bridged 4 ohms: 500 watts
• Specifications:
• Signal to noise: 105 dB
• Stainless steel hardware – used throughout and won’t corrode in humid conditions
• Line level outputs – provides a full range signal for easy connection to additional amplifiers
• Line level inputs – accepts line level input from a head unit, preamplifier, or equalizer
• Level control – adjusts the gain of the left and right channels to match the output voltage from your head unit
• Adjustable low and high pass frequency range – fine tune tour speakers in their frequency range overlap
• FULL, HPF, BPF switch – selects full range, high pass filter, or band pass filter for dialing in your crossover for the ideal speaker blending
• Protection – thermal, DC offset, reverse DC voltage, and short circuit protection
• Toroidal transformers – sleek and efficient design
• High speed MOSFET switching power supply
• Runs cooler than conventional amps
• Nickel plated wire terminals and RCA connectors – ensure maximum signal transfer
• Capable of bridging a left and right terminal into a single full range channel with a higher power output
• Total frequency response: 20 Hz 20 kHz
• High pass filter slope: 12 dB/ octave
• High pass filter frequency: 20 Hz 4 kHz
• Manufacturer warranty: 90-day warranty
• Weight: 3.75 pounds
• Dimensions (with panels): 6.75 x 8.25 x 1.75 inches
• Dimensions (cabinet): 6.75 x 8.25 x 1.75 inches
• Low pass filter frequency: 50 Hz 5 kHz

Shipping Information

VMInnovations is proud to offer fast, free shipping every day. Items are typically delivered between 1-3 days.

Most orders placed before 2:00 PM CST ship the same day.

Free Shipping Details

• Our free shipping service is standard ground shipping with FedEx, USPS, or a regional carrier.
• Items are usually delivered in 1-3 days, but some may take up to 5 days.
• Some orders may require a signature before delivery.
• At this time, we only offer free shipping inside the 48 continental United States.
• Free shipping is not available for APO/FPO.
• Some items can be shipped to Alaska, Hawaii, or Puerto Rico. Please note free shipping does not apply to these locations. You will need to select the AK/HI/PR shipping in your cart.
• We are currently unable to ship items internationally.

Freight Shipping Information (LTL)

Some items are too large to be shipped with a regional carrier, FedEx, or USPS, and we ship these items with our freight carriers.

Please read the information below so you fully understand the delivery process and requirements.

Required Actions

We will need your phone number for the delivery. The carrier will need to call you in order to set up a delivery time. Please make sure the number you provide during checkout is the best one to reach you. If paying with PayPal, please make sure the number on your account is accurate.

You'll need to inspect your package upon arrival before you sign. If your order arrives damaged, you should sign "DAMAGED" on the delivery receipt. If the item is damaged to the point that it is not usable, you can refuse the item.

Please notify and, if possible, send photos of any damage to vminnovations_help@email.spreetail.com, along with your order number. A member of our Customer Experience team will reach out to you with further instructions.

Delivery Information

At this time, we do not offer "in-home" deliveries. Your shipment must be delivered to the curbside and will require a signature. Please be sure you are able to move the item after it arrives, as the carrier will not be able to assist.

We do our best to ship orders as fast as we can. If you need to cancel your order, please let us know as soon as possible by calling our Customer Experience team at 866-639-9320. Please note that if we are unable to cancel your order before it ships, you will be responsible for the shipping charges.

If the item is returned from the freight company for any reason other than damage, additional shipping or storage fees may apply. Reasons may include invalid or incorrect address information, and incorrect phone number or contact information, or failing to schedule or missing an already scheduled delivery appointment.

If the item is delivered and a return is requested, the freight shipping fees will be deducted from the final refund amount.